| Author |
Topic: Recommended strings for Square Neck resonator |
David DeLoach
From:
Tennessee, USA
|
Posted 10 Sep 2022 2:43 am |
|
I've got an RQ Jones square neck that I've hardly touched over the last few years. I need to restring it and tune it to open G.
Any recommendations on what strings to buy?
_________________
https://www.MasterGuitarists.com/ |
|
|
 |
Howard Parker
From:
Maryland
|
Posted 10 Sep 2022 5:17 am
|
|
You have choices.
My personal favorite is the D'Addario EJ42 set.
I'm sure others will chime in.
hp
_________________
Howard Parker
03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L |
|
|
|
Aaron Balano
From:
San Anselmo, Ca
|
Posted 11 Sep 2022 5:13 pm
|
|
| I have used GHS (phosphor bronze, set 1650) for many years. They last a bit longer than the many other brands I have tried, and they sound great. |
|
|
|
John Viterito
From:
New Jersey, USA
|
Posted 17 Sep 2022 4:15 pm
|
|
Asher Open "D" set. They work just fine for high bass open "G".
_________________
Emerald Solace acoustic laps and Rukavina steels. Can't play, but I try! |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 17 Sep 2022 7:36 pm Re: Recommended strings for Square Neck resonator
|
|
| David DeLoach wrote: |
I've got an RQ Jones square neck that I've hardly touched over the last few years. I need to restring it and tune it to open G.
Any recommendations on what strings to buy? |
If it's been sitting for years it needs to be set up by a competent resonator (not guitar) tech - the saddle and cone both compress and need to be reset- and the saddle and nut checked/re-cut for bar contact with no pressure; guitar techs generally set the bottom of the slots the same, which is backwards.
I prefer GHS Scheerhorn sets - but I always analyze the specific resonator's setup and basic tone using test sets before settling on anything. In most cases it also matters what you'll be doing - playing at home, jamming with friends, playing mic'd on stage etc. Different strings are besy for different uses.
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
K Maul
From:
Hadley, NY/Hobe Sound, FL
|
Posted 18 Sep 2022 4:03 am
|
|
I like John Pearse strings. I’ve used both the phos bronze and nickel.
_________________
KEVIN MAUL: Airline, Beard, Clinesmith, Donner, Evans, Excel, Fender, Fluger, GFI, Gibson, Hilton, Ibanez, Justice, K+K, Live Strings, MOYO, National, Oahu, Peterson, Quilter, Rickenbacher, Sho~Bud, Supro, TC, Ultimate, VHT, Williams, X-otic, Yamaha, ZKing. |
|
|
|
David DeLoach
From:
Tennessee, USA
|
Posted 18 Sep 2022 4:09 am Re: Recommended strings for Square Neck resonator
|
|
[quote="Jim Sliff"]
| David DeLoach wrote: |
If it's been sitting for years it needs to be set up by a competent resonator (not guitar) tech - the saddle and cone both compress and need to be reset- and the saddle and nut checked/re-cut for bar contact with no pressure; guitar techs generally set the bottom of the slots the same, which is backwards.
|
Thanks Jim, I'm sure you are correct about it needing a set up.
Anyone know a good resonator tech in the Nashville area?
_________________
https://www.MasterGuitarists.com/ |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 19 Sep 2022 11:50 am Re: Recommended strings for Square Neck resonator
|
|
[quote="David DeLoach"]
| Jim Sliff wrote: |
| David DeLoach wrote: |
If it's been sitting for years it needs to be set up by a competent resonator (not guitar) tech - the saddle and cone both compress and need to be reset- and the saddle and nut checked/re-cut for bar contact with no pressure; guitar techs generally set the bottom of the slots the same, which is backwards.
|
Thanks Jim, I'm sure you are correct about it needing a set up.
Anyone know a good resonator tech in the Nashville area? |
Call Kelcey at Emmons; I trained him a few years ago, but if he can't do it he should know someone who can.
One of the critical mistakes guitar techs make with resonator is that the cut the nut and saddle slots at even height from the fretboard/body - correct for "fretting" instruments, but with a resonator the slots need to be cut so the TOPS are even. That way the bar takes very little pressure when playing multiple strings. as it is sitting flat on all the ones it reaches.
Wrong saddle shape and over-tightening of the tension screw are other "guitar tech" mistakes.
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Joel Day
From:
Arkansas City Kansas, USA
|
Posted 30 Sep 2022 10:35 pm
|
|
I put a new set of Black Diamonds on mine a few weeks back for a show I had, and MAN they are awesome sounding! Totally surprised…. Had 2-3 other players ask me about em and the sound.
_________________
Franklin D10 9/7
Emmons Lashley LeGrand D10 8/7 Strayhorn model.
Emmons Lashley ll D10 9/9
Jackson Dobro
Fender Stringmaster deluxe 8 string single neck-1967
72 Fender tele
Milkman 300 1/2 & 1/2
Eminence Speakers
BJS |
|
|
|
Craig Walters
From:
California, USA
|
Posted 19 Nov 2022 7:44 am
|
|
| I use most any medium gauge set of accoustic strings and use the same gauge for both the first and second second strings, usually both .018's |
|
|
|
