| Author |
Topic: Help with Sho Bud Maverick Knee Lever |
Gunnar Schmitz
From:
Wisconsin, USA
|
Posted 25 Sep 2022 12:49 pm |
|
First time Steel Player here. Have been trying to set up an early 70's Sho Bud Maverick to learn on and the knee lever has been giving me some grief. After sourcing some parts to attach the lever assembly to the changers, I am now running into an issue where the lever does not drive the changers to actually lower the strings. Instead of pushing the changers forward, the rods just slack downwards and do nothing. Do I need different rods? Any advice is helpful - I've been having a hard time sourcing quality info on this lever.
Here is a photo for reference:
|
|
|
 |
johnnyb
From:
Wendell, NC, USA
|
Posted 25 Sep 2022 1:40 pm
|
|
Did you back the tuning screws out at the endplate to let the drop happen?
_________________
Johnny Barham
Pedal Steel Poser at large, without portfolio. |
|
|
|
Eric Dahlhoff
From:
Point Arena, California
|
Posted 25 Sep 2022 1:59 pm
|
|
The Maverick knee lever is designed to lower strings #2 & #8.
Tune both strings without the knee lever. #2 = D# #8 = E
Push the knee lever & use the end plate screws to tune #2 = D #8 = Eb
Hope that makes sense 
_________________
"To live outside the law you must be honest." (Bob Dylan) |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 25 Sep 2022 2:01 pm
|
|
This is a Pull/Release mechanisum strings 2 & 8 are held to pitch with a spring (Looks like it is on the knee leaver) the Release comes when you engauge the knee overrides the spring tention and alows the changer finger to to rotate and lower the string. The rods from the knee leaver to the changer hold the strings to pitch they do not push the changer fingers. The tuning screws are the stop fot the lower.
Good luck
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 26 Sep 2022 12:39 pm
|
|
What others have said more or less answers the question but it's kind of scattered, this pic might help. The tuning process for the raises on the pedals is similar, engage the pedals one at a time and adjust the pedal stop screw (if there is one) and plastic ball sockets at the cross shafts so that the affected fingers make firm contact with the wood in the body opening when the pedal is engaged. The earliest Mavericks didn't have adjustable pedal stop screws, yours looks like like one those. If it does have pedal stop screws you'll to re-adjust them to engage at the same point so that you're not putting unnecessary pressure on the fingers and pull rods. Tune the raised notes on those strings at the key head with the pedal engaged, then release the pedal and tune the open note with the stop screw in the end plate. Repeat for each pedal. Once complete, adjust the individual pedal heights to your preference with the threaded ball joints on the pedal rods. Hope this helps.
_________________
All lies and jest, still a man hears what he wants to hear and disregards the rest - Paul Simon |
|
|
|
Eric Dahlhoff
From:
Point Arena, California
|
Posted 26 Sep 2022 5:47 pm
|
|
Well done Ian !
_________________
"To live outside the law you must be honest." (Bob Dylan) |
|
|
|
