Need a hi-res version of the Emmons logo for a restoration

Michael Lester · From: Illinois, USA

I'm assisting in the restoration of an Emmons from the '60s and need a hi-resolution image file of the Emmons logo.

Any help would be appreciated.

Michael Lester

Jason Putnam · From: Tennessee, USA

If you are looking for the proper front decal the Emmons Guitar Company could probably assist with that.
_________________
1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings

Lynn Stafford · From: Ridgefield, WA USA

Michail,

I have artwork that was done to replicate the Emmons pedal bar sticker, which turned out very good. It could probably be resized to suit your project I imagine.

_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------

Jim Sliff · From: Lawndale California, USA

Emmons Guitar Co. is making wraparounds using the original design and artwork. As previously mentioned they'd be a good source - and based on the guitars and swag they are making everything is dead-on the original designs. Heck, I have big Emmons flag flying outside my house!

Is there some reason you haven't contacted them?
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional

Michael Lester · From: Illinois, USA

Problem solved. Thanks!

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: