Author |
Topic: Zum Bell Cranks Needed |
Tom Bradshaw
From: Walnut Creek, California, USA
|
Posted 4 Aug 2022 7:45 am
|
|
I'm in need of about 6 Zum bell cranks, or cranks that would fit onto 3/8" square cross shafts. Bruce Zumsteg has ceased building his Zum steels. Mike Yahl doesn't have any. Maybe some other steel brand employs 3/8" square cross shafts and their bell cranks would work on this Zum I'm working on. All ideas are welcomed. ...Tom Bradshaw (tommybradshaw@gmail.com) |
|
|
|
Barry Coker
From: Bagley Alabama, USA
|
Posted 5 Aug 2022 3:23 am Zum Bell cranks
|
|
Hi Tom hope your doing well I can make you some bell cranks if you like these will be 6061 aluminum and can be cut to your specks.
Let me know if your interested and what you would like made.
Thanks Barry _________________ Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Jim Reynolds
From: Franklin, Pa 16323
|
Posted 9 Aug 2022 3:45 pm
|
|
Tom, I have just bought Pedal Rods and Bell Cranks from Bruce, in the last 6-7 months for my Zum U-12. _________________ Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974. |
|
|
|
Tom Bradshaw
From: Walnut Creek, California, USA
|
Posted 9 Aug 2022 3:50 pm Different Bell Cranks?
|
|
Jim: Mike Yahl tells me he doesn't have any bell cranks like I need. All I can do is believe him. I would suspect that if he had them he would want to sell them to me. |
|
|
|
Barry Coker
From: Bagley Alabama, USA
|
Posted 9 Aug 2022 4:00 pm
|
|
Hi Tom is this close to what you need?
1/4" wholes 1/8" slot to fit 3/8" squair shaft.
Barry _________________ Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|