| Author |
Topic: Emmons Lashley Legrande III for sale / E9 / C6 double nec |
John Mattern
From:
California, USA
|
Posted 8 Jul 2021 2:09 pm |
|
Emmons Harley Davidson Red/ Orange. Lashley told me it was the only one like it he made at the time.
One owner.
E9 / C6 double neck
One of Ron Lashley Jr.'s last guitars. circa 2011
This guitar is in MINT condition. Very low miles on it.
9 pedals, 7 knees
A table drop compensator is added by Lashley.
Contact John Mattern 707 272 4064 / text or call
jmatternmusic@gmail.com
$4,000.00 OBO Buyer pays shipping
Instrument is in Northern California.
[img]https://bb.steelguitarforum.com/userpix2020-
 |
|
|
 |
Gary Watkins
From:
Bristol, VA
|
Posted 8 Jul 2021 2:53 pm Re: Emmons Lashley Legrande III for sale / E9 / C6 ...
|
|
| John Mattern wrote: |
Emmons Harley Davidson Red/ Orange. Lashley told me it was the only one like it he made at the time.
One owner.
E9 / C6 double neck
One of Ron Lashley's last guitars. circa 2011
This guitar is in MINT condition. Very low miles on it.
9 pedals, 7 knees
A table drop compensator is added by Lashley.
Contact John Mattern 707 272 4064 / text or call
jmatternmusic@gmail.com
$4,000.00 OBO Buyer pays shipping
Instrument is in Northern California.
|
Have the necks been replaced before? Do you have a few pictures of the underside? Were they wooden necks at one time?
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
John Mattern
From:
California, USA
|
Posted 9 Jul 2021 7:01 am Pictures of orange Legrande
|
|
| Quote: |
 |
|
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 9 Jul 2021 7:51 am
|
|
Worth every penny an then some.
Nice Emmons "!!!!! |
|
|
|
Gary Watkins
From:
Bristol, VA
|
Posted 9 Jul 2021 10:03 am
|
|
| Johnie King wrote: |
Worth every penny an then some.
Nice Emmons "!!!!! |
Well, I guess this is headed to you Johnie. You made a wise choice. You ALWAYS get the good deals.
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 9 Jul 2021 11:02 am
|
|
| Gary I wish this Emmons was headed too me. |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 10 Jul 2021 11:02 am Lashley LeGrande III D-10
|
|
This is a very interesting guitar to say the least. Has anyone else noticed the push-pull bolt-on tail pieces? I bet it sounds incredible!
I have a similar LLG III ST-10 and it has really great tone.
Ron Lashley Jr. must have built them around the same time I guess. He told me that he was working on this new design around the time I was there at the Emmons factory around 2010 getting some hands-on training
Here is a link from right after my friend, Tom Palmer acquired the guitar from me.
https://bb.steelguitarforum.com/viewtopic.php?t=307932&highlight=emmons
Sadly, Tom passed away soon after that and his son, Franklin inherited his guitars and equipment. Even more sadly, Franklin passed away at the end of last year. I was able to buy back this LLG III from his widow, Christy, so I now own it again.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
George Seymour
From:
Notown, Vermont, USA
|
Posted 12 Jul 2021 1:18 pm
|
|
PM sent
_________________
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones |
|
|
|
Bud Harger
From:
Belton, Texas by way of Baton Rouge, Louisiana
|
Posted 13 Jul 2021 12:30 pm Matte Finish ?
|
|
This is the first Emmons I've seen with matte finish on the End Plates and Necks.
Pedal bar and pedals, too?
Am I seeing this correctly?
Nice guitar, tho'!
bUd
_________________
bUd
1969 Emmons D-10 8f/4k; Evans Amps. |
|
|
|
Jon Zimmerman
From:
California, USA
|
Posted 13 Jul 2021 12:51 pm
|
|
| Curious to me too is the dark grey finish of alum parts up top. Does it look/feel like a dark anodized treatment? Thx John. It's truly a rare bird. |
|
|
|
Bud Harger
From:
Belton, Texas by way of Baton Rouge, Louisiana
|
Posted 14 Jul 2021 6:31 am Dark gray anodized?
|
|
Very unusual anodized finish on aluminum parts.
Are there other Emmons guitars out there with that finish?
Curious!
bUd
_________________
bUd
1969 Emmons D-10 8f/4k; Evans Amps. |
|
|
|
Jack Strayhorn
From:
Winston-Salem, NC
|
Posted 16 Jul 2021 7:42 am
|
|
| We built a flat black mica body with sand blasted parts once. |
|
|
|
Paul Sutherland
From:
Placerville, California
|
Posted 18 Jul 2021 3:45 pm
|
|
PM sent.
_________________
It don't mean a thing if it ain't got that swing. |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 19 Jul 2021 9:20 am
|
|
Sharp eye there Lynn, I wouldn’t have noticed. Yes, very unusual guitar, probably one of a kind. Bet it does sound great.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 26 Jul 2022 5:19 am
|
|
| Nice Legrande III |
|
|
|
Steven Black
From:
Gahanna, Ohio, USA
|
Posted 30 Jul 2022 2:36 pm Emmons Legrand III
|
|
I tried to get a hold of this person, I am interested in this Emmons Double 10 all pull, just wanted to see if it is still available, my number is 614-562-2291 email me at Black43230@yahoo.com
My name is Steve Black. |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 31 Jul 2022 3:15 pm
|
|
This ad is over a year old.
_________________
Dick Lotspeich |
|
|
|
