Author |
Topic: EMMONS LEGRANDE 600 amplifier |
Daniel J. Cormier
From: Lake Charles, LA, USA
|
Posted 29 May 2022 5:44 am
|
|
Does anyone know who built the Emmons Legrand 600 amplifier. Have one that needs to be repaired. _________________ Daniel J. Cormier
Rittenberry with Tone to the bone,profex or tubefex and what ever amp, hilton pedal, BJS bars. Email at kajunsteelman@yahoo.com. |
|
|
|
Daniel J. Cormier
From: Lake Charles, LA, USA
|
Posted 29 May 2022 5:45 am
|
|
_________________ Daniel J. Cormier
Rittenberry with Tone to the bone,profex or tubefex and what ever amp, hilton pedal, BJS bars. Email at kajunsteelman@yahoo.com. |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 29 May 2022 5:51 am
|
|
Thue "B.K. Butler" and the printing on the faceplate suggests Tubeworks (B.K. Butler).
Can't say where you would find a schematic (if one even exists). |
|
|
|
Daniel J. Cormier
From: Lake Charles, LA, USA
|
Posted 29 May 2022 6:46 am
|
|
Wish I could find someone to at least look at it. Preamp sections works great. Moffitt power amp section may be the issue, I have new transistors for it. _________________ Daniel J. Cormier
Rittenberry with Tone to the bone,profex or tubefex and what ever amp, hilton pedal, BJS bars. Email at kajunsteelman@yahoo.com. |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 29 May 2022 10:45 am
|
|
B.K. Butler also made the MosValve 500 power amps. Output design is probably similar. |
|
|
|
Dale Foreman
From: Crowley Louisiana, USA
|
Posted 29 May 2022 1:07 pm Repai
|
|
Did you check with Mike Scaggs? _________________ Rittenberry Prestige(2) |
|
|
|
Larry Dering
From: Missouri, USA
|
Posted 29 May 2022 5:12 pm
|
|
Genzler amplifier bought out BK Butler. They may be able to help. |
|
|
|
Greg Duncan
From: Florida, USA
|
Posted 30 May 2022 8:14 am Amp
|
|
Bk Butler was bought by Genz Benz
They discontinued all of
Tube works and Bk Butler....
And have no schematics on
Older products...
I contacted them on a pre amp I
have. And all info is gone.... |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
|
|
|
Ken Morgan
From: Midland, Texas, USA
|
Posted 30 May 2022 10:16 am
|
|
A man named Andy works as a designer and tech for Mesa Engineering and Genzler (used to be Genz Benz, leads back to MOSVALVE) who likely knows these things.
Goes by the moniker AgedHorse on Talkbass.com. Might be worth track8ng him down _________________ 67 Shobud Blue Darling III, scads of pedals and such, more 6 strings than I got room for
Ken Morgan
Midland, TX |
|
|
|
Graham Bland
From: Tennessee, USA
|
Posted 31 May 2022 6:53 am Amp
|
|
I would ask Jack Strayhorn who is a member of the forum here and he worked at Emmons as Comptroller "if you will" and builder of Emmons guitars for many years. I'm sure he would know! |
|
|
|