| Author |
Topic: TC Electronics M-One : How to Delete Prior User Pre-Set? |
Ron Funk
From:
Ballwin, Missouri
|
Posted 14 May 2022 10:14 am |
|
Folks -
Couple of questions regarding "Prior User PreSets" on a recently purchased TC Elecronics M-One:
(a) what is the procedure to determine the parameters of a 'prior User's preset' ?
(b) what is the procedure to completely delete a 'prior User's preset' from the unit ?
Thanks
Ron |
|
|
 |
Dave Grafe
From:
Hudson River Valley NY
|
Posted 14 May 2022 10:20 am
|
|
To review the settings of a preset load it and check all the parameters, maybe write them down to keep track. You will have to do this for every preset you want to interrogate.
As for deleting presets check the manual
https://www.tcelectronic.com/product.html?modelCode=P0CJT |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 14 May 2022 10:28 am
|
|
Oh never mind that, it is no help but I remember if you store your new preset with the same number the old one will be overwritten so there's that
M-One is a nice unit, good luck there |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 16 May 2022 9:26 am
|
|
Any help / procedures from other Forum members would be greatly appreciated....
Thanks -
Ron |
|
|
|
Mark Draycott R.I.P.
From:
Portland, OR
|
Posted 16 May 2022 11:57 am Reset
|
|
Here is a google search to reset to factory new settings:
Turn the unit off.
Hold the ENTER key while powering on the unit, and “M-ONE 1.05 Front 1.5” appears on the display.
Choose the menu item “Reset sys param ?”
Press ENTER, and wait a few seconds. The display should read “Clear/reset done.”
Power the unit off and back on
_________________
1976 Sho-Bud Pro II, 1976 Sho-Bud LDG, BF Fender Deluxe, Evans FET 500 LV, BF Princeton Reverb, '68 Vibrolux Reverb |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 16 May 2022 8:42 pm
|
|
Mark -
To clarify, I'm only interested in trying to delete a few (prior) User Presets
Would your procedure eliminate all (prior) User presets ?
Thanks
Ron |
|
|
|
Mark Draycott R.I.P.
From:
Portland, OR
|
Posted 17 May 2022 3:33 am reset
|
|
Hi Ron, yes, that will put your pedal back to the way it came from the factory. You would have a clean slate to start over with.
_________________
1976 Sho-Bud Pro II, 1976 Sho-Bud LDG, BF Fender Deluxe, Evans FET 500 LV, BF Princeton Reverb, '68 Vibrolux Reverb |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 22 May 2022 7:09 pm
|
|
I've figured out the way to delete the parameter's of a Prior User's 'PreSet.'
Simply copy an "unused" User PreSet Number over the Prior User's PreSet Number.
Much Too Simple! |
|
|
|
