| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Pedal rod for late 70’s Emmons
Reply to topic
Author Topic:  Pedal rod for late 70’s Emmons
Sean Ziegler

 

From:
Texas, USA
Post  Posted 29 Apr 2022 11:12 am    
Reply with quote

Hi.

I’m looking for one pedal rod for my 1979 Emmons push pull. Been looking for a while, but haven’t had any luck. The length from top of rod to bottom of threads is 24 3/4”. I believe the width is 4.2mm.

Thanks!
View user's profile Send private message Send e-mail
Paul Norman

 

From:
Washington, North Carolina, USA
Post  Posted 29 Apr 2022 12:50 pm    
Reply with quote

Try Michael Yahl At
www.psgparts.com
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 30 Apr 2022 9:08 am    
Reply with quote

Thanks, Paul.

I might try him. I have a non Emmons made rod on now that works okay, but it gives the action a “spongy” feel. Can’t figure out why, maybe the rod is hair thinner, or the cut in the hook is slightly off? Thought I’d try my luck and search for an original.
View user's profile Send private message Send e-mail
Eric Philippsen


From:
Central Florida USA
Post  Posted 3 May 2022 4:13 am    
Reply with quote

I’ve got extra Emmons rods. PM sent.
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 13 May 2022 10:17 am    
Reply with quote

Still lookin’.

Thanks!
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 15 May 2022 7:21 am    
Reply with quote

I figured a picture of the pedal rod hook would be helpful…





View user's profile Send private message Send e-mail
Jim Reynolds


From:
Franklin, Pa 16323
Post  Posted 16 May 2022 5:30 pm    
Reply with quote

I have one, but the lower part where the hook is is different. What does the upper part look like. I'll take a picture of mine later, and put it on for you to see.
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974.
View user's profile Send private message Send e-mail
Jim Reynolds


From:
Franklin, Pa 16323
Post  Posted 16 May 2022 5:31 pm    
Reply with quote

Mine is an early 70's
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974.
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 17 May 2022 6:02 pm    
Reply with quote

Thanks, Jim.

Here’s the rod in its entirety…
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 17 May 2022 6:04 pm    
Reply with quote

View user's profile Send private message Send e-mail
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 21 May 2022 9:02 am     Re: Pedal rod for late 70’s Emmons
Reply with quote

Sean Ziegler wrote:
Hi.

I’m looking for one pedal rod for my 1979 Emmons push pull. Been looking for a while, but haven’t had any luck. The length from top of rod to bottom of threads is 24 3/4”. I believe the width is 4.2mm.

Thanks!


Hi Sean,

I have a pedal rod that matches yours. Please email me and we'll work things out.
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Jim Reynolds


From:
Franklin, Pa 16323
Post  Posted 24 May 2022 6:15 pm    
Reply with quote

I'm not sure how many I have, but will, dig them out and put pictures on here, If either of you can use them, there cheap. I got these about 6 months ago, from and individual on the forum. He had 4-5 of them, and I bought them all. I'll get back to you both in a few days.
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974.
View user's profile Send private message Send e-mail
Sean Ziegler

 

From:
Texas, USA
Post  Posted 28 May 2022 5:55 am    
Reply with quote

Thanks Everybody.

Lynn Stafford sent me a pedal rod, so I am good to go.

Thanks so much, Lynn!
View user's profile Send private message Send e-mail
Jim Reynolds


From:
Franklin, Pa 16323
Post  Posted 28 May 2022 1:26 pm    
Reply with quote

Lynn is there for his fellow players, for sure.
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron