| Author |
Topic: Push pull pot with Lawrence BL 710 pickup |
John Hyland
From:
South Australia
|
Posted 15 May 2022 12:53 am |
|
Sadly searching hasn’t resulted in much definitive success.
Anyone have info how to wire the three wire humbucker with split coil (white: hot, black: humbucker and red: single coil split.)
If available a diag would be handy.
Thanks
John |
|
|
 |
J Fletcher
From:
London,Ont,Canada
|
Posted 18 May 2022 8:55 am
|
|
| White is hot , black is ground , red is the coil tap . If you short the red to ground , voila!, single coil . Haven't had any experience with this pickup , but that should get you there . |
|
|
|
Marco Schouten
From:
Amsterdam, The Netherlands
|
Posted 18 May 2022 9:54 am
|
|
If you'd have a switch that can short the red to ground or short the red wire to the hot wire, you can even select if you want the coil closest to the changer or the other one.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo |
|
|
|
