| Author |
Topic: Nashville 112 issues |
Nicholas Scott
From:
Norfolk, VA USA
|
Posted 6 May 2022 3:24 am |
|
I have a Peavey Nashville 112 that does not make any sound through the speaker. I can hear the amp kick on when the power is switched on but no sound through the speaker. The Headphone jack on the back works perfectly fine. Any insight would be much appreciated. Thanks!
_________________
Rittenberry D10 Prestige, Peavey Nashville 112, Quilter Steelaire, Telonics VP And Sarno Black Box, Walker Steel Seat |
|
|
 |
Jack Stoner
From:
Kansas City, MO
|
Posted 6 May 2022 4:23 am
|
|
That can be (usually is) a dirty "normal through" contact on an effects loop return jack or on the power amp in jack.
Start by connecting a guitar cord to the Pre EQ out and in. If that doesn't fix it, do the same thing to the Post EQ loop, and if that doesn't fix it do the same thing to the Preamp out/Power Amp in.
Whichever is causing it, plug in/out several times on the return (or Power amp in) to try and clean it. If that doesn't do it, the chassis will have to be removed and contact cleaner used on the jack.
If contact cleaner doesn't work the jack will have to be replaced (or permanently use a jumper guitar cable).
There can be other problems but 99% of the time its one of those jacks. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 8 May 2022 7:36 am
|
|
I had someone call me once about their 112 that was doing the same thing- they had the headphones plugged in and that muted the speaker  . |
|
|
|
Nicholas Scott
From:
Norfolk, VA USA
|
Posted 8 May 2022 8:44 am Jim
|
|
That’s pretty funny Jim. I wish that was the issue. Haha.
_________________
Rittenberry D10 Prestige, Peavey Nashville 112, Quilter Steelaire, Telonics VP And Sarno Black Box, Walker Steel Seat |
|
|
|
