| Author |
Topic: BL705 Pickup - experiencing distortion and buzzing. |
Matthew Kresge
From:
Pennsylvania, USA
|
Posted 1 May 2022 6:51 am |
|
Just picked up a new custom lefty pedal steel. It came with a BL705 pickup, which seems to get a lot of praise on this site but I am getting a significant amount of distortion/cracking coming through my amp when I pluck more than one string at a time (its particularly pronounced when combining strings 4,5 and 6 in any fashion). I am going completely direct and have used multiple amps to assure its not the amp. I have the same results with each. I've done a search and found a couple older posts/threads from others experiencing this same problem, whom I've reached out to here on a private message but have not heard anything back regarding.
Anybody else have any similar experience with this pickup and if so, what was your solution? |
|
|
 |
Joel Jackson
From:
Detroit
|
Posted 1 May 2022 7:44 am
|
|
| Sounds like you're not using a volume pedal. If that's the case, try again using a volume pedal set around 50% volume. Steel pickups are pretty hot and can easily overload the front end of an amp. |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 1 May 2022 8:39 am
|
|
To me it sounds like a grounding issue. Check the ground on the pick-up and check the nut on the jack. See if it's tight. Actually maybe loosen it a little and tighten it back up.
_________________
2013 Williams D-10, 2019 Williams D-10, 1970 Fender Twin, Evans SE200, Fender Tonemaster Twin, Hilton pedal, Jagwire Strings. |
|
|
|
Matthew Kresge
From:
Pennsylvania, USA
|
Posted 1 May 2022 2:26 pm
|
|
| Joel Jackson wrote: |
| Sounds like you're not using a volume pedal. If that's the case, try again using a volume pedal set around 50% volume. Steel pickups are pretty hot and can easily overload the front end of an amp. |
I'm a newb. Not ready for a volume pedal yet. Still getting comfortable with the basics. |
|
|
|
Matthew Kresge
From:
Pennsylvania, USA
|
Posted 1 May 2022 2:28 pm
|
|
| Craig A Davidson wrote: |
| To me it sounds like a grounding issue. Check the ground on the pick-up and check the nut on the jack. See if it's tight. Actually maybe loosen it a little and tighten it back up. |
If it was a grounding issue, wouldn't I hear the same distortion when playing a single string/note? It only happens when I play multiple strings. |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 1 May 2022 2:47 pm
|
|
I was going with the crackling description.
_________________
2013 Williams D-10, 2019 Williams D-10, 1970 Fender Twin, Evans SE200, Fender Tonemaster Twin, Hilton pedal, Jagwire Strings. |
|
|
|
Michael Conway
From:
Chicago, Illinois
|
Posted 1 May 2022 7:26 pm Bl 705
|
|
| When I had distortion problems with my 705, I was able to fix it by lowering the pickup a little but. I’d also really recommend picking up a volume pedal, even as a beginner. Never too early to start working on VP technique, and it might help with this problem as well. |
|
|
|
Matthew Kresge
From:
Pennsylvania, USA
|
Posted 1 May 2022 7:40 pm Re: Bl 705
|
|
| Michael Conway wrote: |
| When I had distortion problems with my 705, I was able to fix it by lowering the pickup a little but. I’d also really recommend picking up a volume pedal, even as a beginner. Never too early to start working on VP technique, and it might help with this problem as well. |
Yes, lowering the pickup is what I suggested to the maker. It's pretty hot right now. I only have to turn my amp up to 2 when I practice. And I do have a volume pedal. As a newb, figured it was more important to focus on learning the other 3 pedals and knee levers first before worrying about swells...but your advice is obviously valid and appreciated. |
|
|
|
Marc Jenkins
From:
Victoria, British Columbia, Canada
|
Posted 1 May 2022 10:59 pm
|
|
| Common practice is to attack the strings with the volume pedal between 1/3 and 1/2 volume only. Try this and report back - I’m guessing the distortion won’t be present set this way. |
|
|
|
