| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic slipping leg...
Reply to topic
Author Topic:  slipping leg...
Karl Paulsen

 

From:
Chicago
Post  Posted 2 May 2017 4:24 pm    
Reply with quote

I've got an Encore with a lift kit and it seems that no matter how much I tighten the leg extender sleeve eventually I push down my 1 and 2 pedals and I feel something give which is the left forward leg slipping down. It'll stay in that position for a while and then it will sink again and my pedals will be hitting the floor.

Any ideas what I can do to fix this? It's getting annoying.

Maybe swapping the two front legs?


Last edited by Karl Paulsen on 2 May 2017 4:34 pm; edited 2 times in total
View user's profile Send private message Send e-mail Visit poster's website
Lane Gray


From:
Topeka, KS
Post  Posted 2 May 2017 4:31 pm    
Reply with quote

Get a dowel too big for the inner leg, but small enough to fit in the outer leg. Start with about 3 inches, put it inside, then assemble it, measure how much to trim for the desired length. The dowel will prevent further collapse.
OR get a length of PVC pipe to fit between the pedal bar and the leg clutch.
Actually,the pipe is a better solution, if uglier.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Karl Paulsen

 

From:
Chicago
Post  Posted 2 May 2017 4:36 pm    
Reply with quote

I think I'll go the dowel route. I like my guitar pretty.
Thanks!

Is this a common thing?

Is my use of a lift kit the reason for this? All the pictures of Encore's I've seen have the adjustor sleeve resting on top of the pedal bar which I assume means they are not lifted at all.
View user's profile Send private message Send e-mail Visit poster's website
Lane Gray


From:
Topeka, KS
Post  Posted 2 May 2017 4:48 pm    
Reply with quote

The leverages involved mean that the pedal bar will be happiest snugged up to the clutches. Lift kits generally include a spacer tube.
I apologize for not remembering that bit.
If you want it pretty, I'd get a length of either Aluminum or copper pipe, polish it til it gleams, then wax it.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Rick Bernauer

 

From:
Kansas, USA
Post  Posted 2 May 2017 6:33 pm    
Reply with quote

Karl - I've had the same problem. Putting in the dowel is probably the best approach but I didn't want to cut and measure - maybe I should measure then cut. Anyway, I bought 2 5/8" Chrome Plated Clamp-On Shaft Collars (Part #3370K19) from McMaster-Carr. I put one on the left front leg right on top of the pedal rack and adjusted the leg length to where I wanted it, then put the other clamp right below the clutch. The left leg stays right where I want it, the clamps match the chrome legs so nobody even notices them.
View user's profile Send private message Send e-mail
Bill Moore


From:
Manchester, Michigan
Post  Posted 2 May 2017 6:59 pm    
Reply with quote

I sold an Encore a while ago. The buyer was tall, so I raised the guitar for him. I made the pedal rod extensions. I used 1/2" dowels in all 4 legs. Here are a couple of pics.








View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 2 May 2017 7:19 pm    
Reply with quote

I'd forgotten the Encore uses the bolt. The dowel will work fine.
You only need the pipe when the pedal bar clamps to the leg.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Karl Paulsen

 

From:
Chicago
Post  Posted 3 May 2017 4:59 pm    
Reply with quote

Crazy thing just happened.

I pulled the two front legs off to get some idea of the sizes of dowels I'd need and the one over by the volume pedal wouldn't shorten. In fact it's lowest position was exactly where I wanted the left one to be.

I took it apart and found an orange yellow plastic spacer stuck to the end of the adjustable leg! That Doug is a clever fellow.

There was no marking on that leg that I remember, but I'm pretty sure that leg is intended to be the one by the pedals. I swapped them and lowered my pedals a bit and everything seems to be hunky dory!

If I need to raise it anymore I'll glue a couple of nickels on top and if the other legs get slippy I'll dowel them, but the pedal leg is the only one that's ever slipped, so I've probably got this thing solved.

Thanks everyone for your advice!
View user's profile Send private message Send e-mail Visit poster's website
Rick Bernauer

 

From:
Kansas, USA
Post  Posted 21 Nov 2017 6:11 am    
Reply with quote

Someone asked - so here's a picture of how I added clamps to the left leg to prevent slippage.

View user's profile Send private message Send e-mail
Neil Murphy

 

From:
Ireland
Post  Posted 12 Oct 2022 7:21 am    
Reply with quote

This is why I love this forum.
I have an old ZB Custom that I just bought a couple of weeks ago. Sitting down to play today, the left front leg suddenly slipped, sending the pedals to the floor. I nearly gave myself blisters trying to tighten it up again. Then I read about the wooden dowel fix. Elegant in its simplicity. Playing away happily again Very Happy
View user's profile Send private message Send e-mail
Patrick Timmins


From:
Seattle
Post  Posted 17 Oct 2022 1:38 pm    
Reply with quote

Since I have started repairing PSGs, a common practice for me is to push down on the guitar to see how the leg clutches are holding up. If it looks like it has been on the road a lot, I will just service them anyway.
If there is any slippage, just disassemble the legs, put all the clutch parts in the ultrasonic cleaner and degrease the legs and clutch threads on the upper part of the leg. Usually use a brass wire brush to clean out the threads with a little simple green. Use a thread file to clean up dings if present. Dry the parts with compressed air and reinstall. Thee phenolic like material clutch parts really have to be dried thoroughly. Helps immensely and you don't have to tighten them up so much to get them to stay put. Convenient when you come across uneven floors.
I've had a few guitars come in where the leg clutches have been oiled. Most of the time it is just years of gunk, debris, and who knows what that have gotten in there.
_________________
Microphones, Recording, and lots of pedal steel guitars!
View user's profile Send private message Send e-mail Visit poster's website
Charlie Powell


From:
Kingsport, Tennessee, USA
Post  Posted 18 Oct 2022 5:13 am    
Reply with quote

Here is the shaft collar I used. Easy obtainable. In stock at local Tractor Supply. I did have to open the ID ever so slightly with a Dremel tool.

https://www.tractorsupply.com/tsc/product/hillman-shaft-collar-5-8-in-pack-of-5?cm_vc=-10005
_________________
Charlie Powell
View user's profile Send private message Send e-mail
Charlie Powell


From:
Kingsport, Tennessee, USA
Post  Posted 18 Oct 2022 5:28 am     For Uneven Floors
Reply with quote

For uneven floors, I carry some of these in my seat. Quicker and easier than messing with adjusting legs so they wont be right for the floor at the next place you play...



_________________
Charlie Powell
View user's profile Send private message Send e-mail
George Biner


From:
Los Angeles, CA
Post  Posted 20 Oct 2022 2:55 pm    
Reply with quote

I used a strap wrench and tightened the **** out of the knurled nut -- problem solved.
_________________
Guacamole Mafia - acoustic harmony duo
Electrical engineer / amp tech in West Los Angeles -- I fix Peaveys
"Now there is a snappy sounding instrument. That f****r really sings." - Jerry Garcia
View user's profile Send private message Send e-mail
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 21 Oct 2022 3:53 pm    
Reply with quote

The only leg I ever adjust is the right-rear. (No matter how irregular the floor, the other three legs will always sit solidly.) maintaining the left rear leg at one constant height keeps all the left-side pedal and lever physiology relationships stable and constant.

And if you have a guitar with the ZB type legs (collar not down against the pedalboard), it's probably a good idea to drill the front legs and add a screw/wingnut arrangement to secure the pedalboard. To me, that's more aesthetically pleasing than using collars or pieces of tubing.

Of course, the hidden "dowel in the leg trick" is also a good solution if the front clutches slip.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron