| Author |
Topic: Stringmaster Blend Pot Specs |
Tony Oresteen
From:
Georgia, USA
|
Posted 16 Apr 2022 10:20 am |
|
I have a Stringmaster wiring diagram from Seymour Duncan and it shows the blend pot as a 250K audio taper pots. Is that correct?
It also shows a 1meg linear pot for the tone control with a .05 mfd cap. Is that also correct?
Thanks!
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
 |
Brad Davis
From:
Texas, USA
|
Posted 17 Apr 2022 3:09 pm
|
|
| It kind of depends, for which Stringmaster? |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 18 Apr 2022 4:03 am
|
|
T8
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Brad Davis
From:
Texas, USA
|
Posted 18 Apr 2022 9:23 am
|
|
Well, the Mk1 models are a little different as they only have a blend pot, and it is not 1Meg. But if you refer to the second page of this old thread I basically dug up all the wiring diagrams I could find (about 4 of them):
https://bb.steelguitarforum.com/viewtopic.php?t=318888&postdays=0&postorder=asc&start=25
If yours is not a Mk1 ('53-55 long scale) then the Seymour Duncan diagram may be fine, although it's really for a single neck Fender "Deluxe". |
|
|
|
