| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Need Pot!
Reply to topic
Author Topic:  Need Pot!
Brian LeBlanc


From:
Falls Church, Virginia, USA
Post  Posted 31 Mar 2022 6:53 am    
Reply with quote

2 old ShoBud volume pedals

source?

...also for a Fender 400:

- source for cap attached to Tone Pot
- and probably re-winder for Jag-style pickup
...ohms goes from 8.5 to 2.5 for no apparent reason


_________________
'Frenchy' LeBlanc...
ShoBud & Twins
View user's profile Send private message Send e-mail
Robert B Murphy


From:
Mountain View, Arkansas, USA
Post  Posted 31 Mar 2022 9:21 am    
Reply with quote

Antique Electronic Supply, (tubesandmore.com). You can get CTS, Bournes, Alpha pots and caps too. Their prices are pretty reasonable especially when compared to the mainstream electronic component vendors. Make sure whether you're getting a linear taper or a log (audio) taper replacement.

Check out the Stringmaster Pickups thread by Jim McGinnis in the Steel Without Pedals category for rewinding recommendations.
_________________
Bob, small o.
View user's profile Send private message Send e-mail
Michael Brebes

 

From:
Northridge CA
Post  Posted 31 Mar 2022 11:05 am    
Reply with quote

You can also get the capacitor from Stewmac.com. Is the pickup resistance intermittent or a solid drop down to the 2.5K? That could have something to do with the problem you're having.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 1 Apr 2022 6:07 am    
Reply with quote

Brian LeBlanc wrote:
Topic: Need Pot!


Well, there's this guy named Julio down by the 7/11, and he...uhh...



Oh, THAT kind of pot! Embarassed Laughing
Anyhow, there are several available sources for the pots in the guitar, but first I'd try just spraying them with good cleaner/lube and working them back and forth rapidly (from stop to stop) about 15 or 20 times.

If you need a cap, just PM me your address and I'll send you one, gratis.

Quote:
...ohms goes from 8.5 to 2.5 for no apparent reason


I'll make a SWAG and guess that you didn't unhook the pickup to measure it, so that variation could very well be caused by the dirty pot. It happens.

And lastly, replacement pots for the volume pedals can be obtained from several dealer/forum members, like Tom Bradshaw or Bill Ferguson. Contact them or do a SEARCH if you need more info.
View user's profile Send private message Send e-mail
Eric Duarte


From:
Santa Cruz, California
Post  Posted 4 Apr 2022 4:05 pm    
Reply with quote

Brian - What year is your 400? The inside of the cavity looks a lot like my 800 with the same components and that yellow wire I thought was not original. Has the same era cap possibly. I’m trying to figure out what year mine is.

I am also having some electronic issues where my volume and tone knobs have 2 options: off and 10. I’m going to be replacing the pots, cap, and wiring soon. I tracked down an NOS cap that looks identical to the one it’s replacing.

Adding a pic of my electronics.






_________________
-Eric
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron