| Author |
Topic: Wtb Kluson Tuners For Emmonx P/p Or Repl, |
Earl Terry
From:
norwalk Iowa, USA
|
Posted 4 Apr 2022 5:00 am |
|
LOOKING FOR SORCE FOR KLISOA TUNERS USED ON EMMONS
P/P. THEY ARE SQUARE WIYH OIL KOLE AND MONTED WITH TWO SCREWS. THANK YOU |
|
|
 |
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 4 Apr 2022 8:40 am
|
|
Kluson is not available anymore.
www.stewmac.com has Gotoh almost identical.
You will have to get a tiny drill bit and wallow the mounting holes out to fit.
the gotoh number is 0933 they come 3left and 3 right in a package. So you have to order 2 sets giving you 12 total
2 extra.
You can call Lynn Stafford and see if a newer source has become available.
This is not as bad of a job that it sounds. |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 4 Apr 2022 4:46 pm
|
|
Klusons are available at Kluson
Google Kluson.com
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 5 Apr 2022 4:13 am
|
|
| Chris Lucker wrote: |
Klusons are available at Kluson
Google Kluson.com |
Yup. I even noticed a couple of "ashtray" type tuning key plates for Fender Champion and Stringmaster steel guitars. Cool.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Jim Reynolds
From:
Franklin, Pa 16323
|
Posted 9 Apr 2022 11:05 am tuners
|
|
Go to e-bay, type in Kluson Tuners, look at the new ones they have Kluson Revolution. I have bought new standard Emmons ones, and they still had slop in them. I had two Emmons, so I bought four boxes of the new one. They are absoutely great. NO SLOP at all.
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974. |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 9 Apr 2022 5:06 pm
|
|
I suggest you get a box of stainless 4-40 mounting screws from McMaster Carr. You don’t know how many times the original nickel plated screws have been torqued and snapping the head off on one of those tiny screws is a nightmare.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Jim Reynolds
From:
Franklin, Pa 16323
|
Posted 9 Apr 2022 5:21 pm
|
|
I have never had a problem them.
_________________
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974. |
|
|
|
Eric Philippsen
From:
Central Florida USA
|
Posted 10 Apr 2022 7:29 am
|
|
Those Klusons do wear out.
A couple of questions…..
1) Years ago, the so-called Kluson “original” replacement keys weren’t so original. Their mounting holes were a fraction off which then required enlarging the tuner holes to allow the keys to fit. It wasn’t THAT big of a task to do that but it seemed the company could have done better. Anyway, are the current Klusons exact fits that require no drilling?
2) Has anybody compared the turn ratios of old Klusons, Gotohs, the new Klusons and other drop-in replacements? I’m pretty sure the originals were 15:1. Are any that are available now higher than that? ‘Cause if they have a higher turn-ratio I want to use those.
Thanks. |
|
|
|
