| Author |
Topic: Pv Nashvill 400 |
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 19 Feb 2022 7:07 am |
|
| Iam curious to know where is the fx loop on the Nashville 400 front or back? |
|
|
 |
Bill Ferguson
From:
Milton, FL USA
|
Posted 19 Feb 2022 7:17 am
|
|
On the front
You can download a free manual at Peavey.com
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 19 Feb 2022 2:44 pm Pv Nashville 400
|
|
| What are the in and out Jack's on the back used for? |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 19 Feb 2022 4:39 pm
|
|
The preamp out can be used to send to a mixer. It can also be used as a send return just like on the front, from the preamp out to the power amp in. The power amp in only, can be used to power the speaker from another preamp, such as patching two amps together and only wanting to use one set of controls. So to Nashville 400s together you could come out of the preamp out on the back of one and the power amp in on the back of the other and only use one set of front controls and equalizer
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 19 Feb 2022 5:14 pm Nashville 400
|
|
| Thx. BILL |
|
|
|
