| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Landis Accupick Thumb Pick Review
Reply to topic
Author Topic:  Landis Accupick Thumb Pick Review
David Ball


From:
North Carolina High Country
Post  Posted 4 Feb 2022 6:22 pm    
Reply with quote

I recently received a Landis Accupick Thumb pick, and thought I'd give a quick review. I have been using Fred Kelly Speed Picks for quite some time, and like them a lot. But, especially in the dry winter weather, I have problems with them slipping on my thumb.

The Landis Accupick had a similar shaped blade plus the "death grip" texture inside, so I decided to give them a shot. The spiral design of the Accupick gives the ability to make the blade whatever length you want, and the general fit of the pick as loose or tight as you like. It takes some fiddling around, and the metal is thick so it's not just super easy to bend, but it bends just fine and holds its shape once you get it there. The fiddling around time is worth it though. I have mine set to where the blade is about where it was with the Kelly pick, though I can tweek the angle a bit with some bending to make it even better. With the "death grip"texture, it stays put on my thumb. Very nice.

I've never liked metal thumb picks in the past, but the tone of this one is very good. Better even than the Kelly pick. It plays really well.

Anyway, bottom line for me is that it takes some patience to get it set up right, but unlike most thumb picks, it can actually be set up exactly as you want it. It stays put and sounds great. Plus it looks nice! For what little it's worth, I recommend them!

No affiliation with Landis other than satisfied customer.


Dave
View user's profile Send private message Send e-mail
John McClung


From:
Olympia WA, USA
Post  Posted 4 Feb 2022 9:29 pm    
Reply with quote

I'd like a review after 5 years of use. Seems like a metal pick would wear out strings over time, and itself get worn down where the pick strikes strings...?
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Edward Dixon


From:
Crestview Florida
Post  Posted 5 Feb 2022 3:50 am    
Reply with quote

I am also very happy with my Picks from Landis. I wouldn't worry about the pick wearing out or getting scratched, they are much more durable than plastic picks. It would take a long time to wear out the strings with these picks, far longer than I would go between string changes.

Ed
_________________
"Faith don't need no second opinion."
View user's profile Send private message Send e-mail Visit poster's website
David Ball


From:
North Carolina High Country
Post  Posted 5 Feb 2022 4:01 am    
Reply with quote

John McClung wrote:
I'd like a review after 5 years of use. Seems like a metal pick would wear out strings over time, and itself get worn down where the pick strikes strings...?


I figure that metal fingerpicks have worked well for me for many years, I'd just never found a metal thumbpick that I liked up until the Landis. Yeah, 5 years will tell, but I don't see any reason that wear and tear on either the pick or the strings should be any different than with metal fingerpicks.

Dave
View user's profile Send private message Send e-mail
Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 5 Feb 2022 6:11 am    
Reply with quote

John McClung wrote:
I'd like a review after 5 years of use. Seems like a metal pick would wear out strings over time, and itself get worn down where the pick strikes strings...?

I know nothing about the thumbpick presented in this thread, but I hope it isn't made of too soft metal.

Having mainly used a metal thumb-pick for about 30 years, I can assure that metal picks can work just fine, and if shaped and polished well do not lead to excessive string wear.
Mine are shaped (by me) out of some horribly oversized hard-steel picks that came with an autoharp I bought back in the days, and I have only had to polish them lightly a couple of times in 30 years…




The half-a-dozen regular, softer metal, picks made for PSG that I have tested in later years, only lasted a few hours of picking at most before becoming scratched up and useless. I have given up on those, and luckily my old ones still work just fine.
View user's profile Send private message Send e-mail Visit poster's website
Paul Stauskas


From:
DFW, TX
Post  Posted 5 Feb 2022 11:41 am    
Reply with quote

Landis picks are amazing works of craftsmanship. The feel is quite different from the Fred Kelly picks - much softer. The bands can be easily shaped to one's liking. I'm still playing around with mine but would highly recommend these picks.
_________________
My site
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron