Author |
Topic: Emmons pedal pins |
Marty Broussard
From: Broussard, Louisiana, USA
|
Posted 20 Jan 2022 1:29 pm
|
|
Need (5) like the one circled below.
_________________ RETIRED
"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 20 Jan 2022 3:22 pm Emmons Pedal Pins
|
|
Marty,
Those are just 3/16" dia. x 7/8" long steel dowel pins. You should be able to find some at any good hardware store.
You'll need a drift punch to gently drive them out. Be careful, those pedals are weak in that area because of the hole. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Marty Broussard
From: Broussard, Louisiana, USA
|
Posted 20 Jan 2022 4:26 pm
|
|
Thank you, Lynn!!
Hope you are doing well. _________________ RETIRED
"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin |
|
|
|