| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic unwound a Wallace True Tone from 18,5 to 16,2 kOhm
Reply to topic
Author Topic:  unwound a Wallace True Tone from 18,5 to 16,2 kOhm
Norbert Dengler


From:
germany
Post  Posted 2 Jan 2022 4:39 am    
Reply with quote

i always preferred classic country over the modern stuff and love the sound of the steel guitars on older recordings. after having read a thing or two about the differences that pickups can make i tried out a couple of humbuckers and single coils. I have a very good guitar and ended up with a BL 705 the last years. i had two Wallace Truetones in my closet, wound to 18,5, that, although great, i found too dark for my taste. Not enough twang on the low strings and overall too mild.
I finally decided to try to unwind one of them to get a clearer sound.

What a terrible job, you always are in danger to break the tiny wire and ruin the whole pickup. my nerves were through at 16,2 and i decided to give that a try.

All i can say is it was worth the effort, never had a sound as good as now, the bass strings came alive, the treble is cutting but not piercing, the whole guitar that was already great literally got a lift. Wow!
i highly recommend everybody considering a single coil with about 16 kilo or less like the ones they had on the older Emmons and Showbud guitars.
I`ve heard about that for a long time and in my case that's definitely the case.
A guy on the forum, (steeltronics i guess) offers classic pickups at any wind you want.
a great new year to you all Smile
View user's profile Send private message Send e-mail
John LeMaster


From:
North Florida
Post  Posted 2 Jan 2022 7:14 am     Pickup unwound
Reply with quote

Norbert, thanks for your post about unwinding a Wallace Truetone pickup from 18.5 down to 16.2K. I don't know if I have the nerve to do that, but, I have a question for you:

Did unwinding down to 16.2K ohms make any difference in the single coil hum? Either more, less, or no difference in hum?

John L.
_________________
Magnum D10, Emmons D10 push-pull
View user's profile Send private message Send e-mail
Michael Brebes

 

From:
Northridge CA
Post  Posted 2 Jan 2022 8:02 am    
Reply with quote

From my experience, reducing the amount of turns on a single coil pickup does not change the amount of inherent hum to the output signal of the pickup.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail
Norbert Dengler


From:
germany
Post  Posted 2 Jan 2022 9:35 am    
Reply with quote

Hi John, i will play the first gig in february, playing at home there's no disturbing hum so far.
I use a Fender Tonemaster amp, that sounds like a tube amp and has no noticeable hum anyway.
If I put the volume high up there's some hum but i doubt that's a problem at band level.
of course you never know how the situation at the gig-venue is.
I rarely had serious problems with single coils when playing concerts so far neither with my telecaster nor with steel.
recording might be different, but everybody knows what great stuff has been done by our heroes with single coils.
I really liked the E 66 and BL 705 humbuckers but my 16,2 True Tone just sounds better to me, much fun to play now.
And thanks Mike for the info.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron