| Author |
Topic: Baby bloomer |
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 20 Nov 2021 11:21 am |
|
| Hoe are you running the bloomervolume ped. Out to bloomer bloomer out to amp I keep getting overdrive out of amp |
|
|
 |
Roger Crawford
From:
Griffin, GA USA
|
Posted 21 Nov 2021 6:02 am
|
|
| I believe the Bloomer should be the last thing you amp sees. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 21 Nov 2021 6:17 am Baby bloomer
|
|
| Thanks Rodger that's the way I have it but I still get the overdrive in my amp I use a power supply, also have fresh battery but thank you for input KEEP PIKKIN my friend |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 21 Nov 2021 6:35 am
|
|
| Ron..Check how you have the indicator set, I find the unit will begin to overdrive the signal at settings above the 11:00 to 12:00 O'clock range. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 21 Nov 2021 9:02 am Baby bloomer
|
|
| Thanks David |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 21 Nov 2021 12:27 pm
|
|
Ron, are you using an active volume pedal, ie, Hilton or Telonics?
These could also overdrive the input of the BB.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 21 Nov 2021 12:30 pm Baby bloomer
|
|
| Yes Bill Telonics and I don't want to change pedals so guess sell the baby |
|
|
|
George Redmon
From:
Muskegon & Detroit Michigan.
|
Posted 2 Dec 2021 1:14 pm
|
|
| Ron, don't feel alone, that's the same problem i had when i tried one out. I use a Hilton pedal, and the BB was so squirrelly with it. I found the BB didn't work well with my setup. Got a distorted thin signal, when the input section of the BB unit was pushed at all. |
|
|
|
kevin ryan
From:
San Marcos, California
|
Posted 3 Dec 2021 2:11 pm
|
|
| Sorry to hear a few folks having these issues with the baby bloomers. Ron, send me your pedal and I will refund your money. We have tested these with Hilton pedals and the fantastic Telonics pedals without issue. I use it with an active pedal along with other effects and I play hard and loud. It absolutely cleans up my tone and adds a desirable new character to my sound. It can add up to 3db of gain and so theoretically could cause impedence issues, white noise, gain hum. There are so many variables now days with amps and cords and multiple buffers etc. Trouble shooting sometimes is a bit of an art form. I wish I could come over and see the issues first hand but of course I can't. |
|
|
|
