| Author |
Topic: Goodrich matchbox |
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 22 Nov 2021 7:44 am |
|
| If you are using a Telinics volume pedal do you need to use the matchbox? |
|
|
 |
Jack Stoner
From:
Kansas City, MO
|
Posted 22 Nov 2021 8:15 am
|
|
The short answer is no.
The Telonics VP provides a constant Impedance load, like a Matchbox. The load Impedance is adjustable on the Telonics.
Only reason to use it would be a tone control (if the one you have, has a tone control). |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 22 Nov 2021 8:44 am Goodrich matchbox
|
|
| Thanks Jack keep pikkin my friend |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 22 Nov 2021 10:19 am
|
|
I should have noted in my original post, I have a Telonics VP and a Goodrich Matchbro that has basically a Matchbox with the dobro effect off.
I get the same sound either through the Matchbro bypass position or direct to the Telonics VP. I had a Hilton VP and it too provides constant Impedance on input like the Telonics. |
|
|
|
Ron Epperson
From:
Riverside,Calif. U.S.A.
|
Posted 22 Nov 2021 11:57 am Goodrich matchbox
|
|
| Thanks again Jack |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 22 Nov 2021 12:00 pm
|
|
I like the Matchbox for no other reason that I have volume and tone controls right at my fingertips. 
Erv |
|
|
|
