Butch Pytko
From:
Orlando, Florida, USA
|
Posted 31 Oct 2021 1:53 pm |
|
Looking for LKL2 staggered assy for a SKH Legrande. Photo shows LKL2 installed on a LeGrande lll, and my SKH looks to have the same amount of room...
Parts...
knee bracket short .900 = 7/8" with mounting screws
knee bracket long 1.150 = 1 1/8" with mounting screws
2 nylon spacers 1/4" ID X 1/2" OD X 3/32" thick
crossbar = 7 3/8" long This length doesn't have to be
exact, I would want it close so I can
move the knee lever forward and back
to the best position, then mount the
knee lever stop.
knee lever handle black anodized 7 1/2" long with plate and
lock screws
knee lever stop with adjustment screw and mounting screws
2 pull rods .109 #4-40 thread 29" long If you don't have
these, I can get them from PSG parts.
2 bellcranks 4 hole with set screws
2 swivels with set screws
Thanks. |
|
