Author |
Topic: Sweet spot knee leaver Flag you can build! |
Johnie King
From: Tennessee, USA
|
Posted 25 Sep 2020 3:30 pm
|
|
These are for a s10 push pull.
Two ways to make these in picture below.
Here in pictures shows a easy way to build a quick release knee leaver flag sometimes you need a large flag especially on left knee left on a s10 but a large flag would not fold the Quick release flag will work just loosen the screw an slip it off.
The metal in the flag is there to show how the flag attaches too a Emmons knee that’s 3/8 thick.
Just a quickie build here too help the guys that like to make there own flags.
The milled flag is neater but there’s a lot of milling with the waste you need too mill away.
These Knee flags are adjustable that’s the reason for the name sweet spot it just depends on where your knee hits the most comfortable sweet spot.
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
Last edited by Johnie King on 7 Oct 2020 3:44 am; edited 14 times in total |
|
|
|
Johnie King
From: Tennessee, USA
|
Posted 25 Sep 2020 3:32 pm
|
|
|
|
|
|
Johnie King
From: Tennessee, USA
|
Posted 25 Sep 2020 3:35 pm
|
|
|
|
|
|
Johnie King
From: Tennessee, USA
|
Posted 25 Sep 2020 3:40 pm Re: Sweet spot knee leaver Flag
|
|
These Knee flags are adjustable that’s the reason for the name sweet spot it just depends on where your knee hits the most comfortable sweet spot.
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
These will fit any steel knee lever with square or rectangle knee but the milled groove has too fit snug so the tolerance for snug fit has to be a friction fit too function right.
[/quote] |
|
|
|
Jim Fogarty
From: Phila, Pa, USA
|
Posted 1 Oct 2020 2:28 pm
|
|
How much......and will it fit on a Stage One?
Thanks! |
|
|
|
Robert Rogers
From: Manchester,TN
|
Posted 5 Oct 2020 8:18 am
|
|
Johnie that's a great product |
|
|
|
Ron Hogan
From: Nashville, TN, usa
|
Posted 6 Oct 2020 4:30 am
|
|
Robert Rogers wrote: |
Johnie that's a great product |
Plus he has one of the only steel shops left in Nashville. |
|
|
|
Johnie King
From: Tennessee, USA
|
Posted 15 Sep 2021 9:59 am
|
|
A timely bump
For turd in a churn 😆 evidently! |
|
|
|
Marty Broussard
From: Broussard, Louisiana, USA
|
Posted 28 Sep 2021 8:22 pm
|
|
Wish I’d known you’re making these. _________________ RETIRED
"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin |
|
|
|
Leo Grassl
From: Madison TN
|
Posted 20 Oct 2021 5:16 pm
|
|
Excellent work Johnnie. These are great!!
LG |
|
|
|