| Author |
Topic: Optimal Width for Sitar Bar |
John Larson
From:
Pennsyltucky, USA
|
Posted 7 Oct 2021 10:53 am |
|
What is the optimal width of the milled flat part on a sitar bar? What is the thinnest that would work?
_________________
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5 |
|
|
 |
Kenny Davis
From:
Great State of Oklahoma
|
|
|
|
John Larson
From:
Pennsyltucky, USA
|
Posted 7 Oct 2021 4:15 pm
|
|
Does anyone have closeup pics of the Franklin style sitar bar?
_________________
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5 |
|
|
|
Ethan Shaw
From:
Texas, USA
|
Posted 8 Oct 2021 11:42 am
|
|
| In my experience, the thicker the better. It sounds the most like a sitar if it's heavy enough to almost just lay on the strings by itself. You want to put almost no downward pressure from your hand. |
|
|
|
