| Author |
Topic: Tuning an Emmons Le Grande |
Ted Kyte
From:
Alberta, Canada
|
Posted 29 Sep 2021 6:09 pm |
|
I am buffaloed trying to find out how to tune all the pedals and knee levers.
Can anyone tell me how to do this and explain the allan screws and the hex nuts on the end of the guitar?
I have the tool for the hex nuts and an allan wrench for the top ones but no idea what to do properly.
Also on the Suggested Emmons copedent, on string 2 (D# RKR) it has 2 settings (D / C#) what does that mean.
I thank you in advance for your advice it never fails on this forum...
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
 |
Bill Moore
From:
Manchester, Michigan
|
Posted 30 Sep 2021 3:51 am
|
|
| Ted, just google "how to tune a pedal steel guitar" you will get lots of links that will explain it. |
|
|
|
Ken Pippus
From:
Langford, BC, Canada
|
Posted 30 Sep 2021 6:21 am
|
|
| Email sent. |
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 1 Oct 2021 7:46 am
|
|
| Bill Moore wrote: |
| Ted, just google "how to tune a pedal steel guitar" you will get lots of links that will explain it. |
Hi Bill....
I did that but nothing comes up with all the setscrews and hex nuts I have...
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
John Palumbo
From:
Lansdale, PA.
|
Posted 1 Oct 2021 12:25 pm
|
|
Here is a youtube vid from Mickey Adams that may help you with the (allan)split screws. It looks a little tough to me but may be of help to you.
https://www.youtube.com/watch?v=8BWRBvau4ms |
|
|
|
Anthony Parish
From:
Austin
|
Posted 1 Oct 2021 1:06 pm
|
|
Ted, those allen screws are used to fine-tune the strings that are simultaneously raised and lowered (the "splits"). Lots and lots of guitars don't have those screws. You may want to start by backing them out so they have no effect on the tuning. Then just use the tuning nuts below to tune the guitar. That'll get you 95% of the way there. Then, when you get the hang of it, move on to Mickey Adams' video that discusses the allen screws. Best of luck!
Tony |
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 1 Oct 2021 1:24 pm
|
|
Thanks John...
Huge help answers all my questions....and creates more of course...
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 1 Oct 2021 1:27 pm
|
|
| Anthony Parish wrote: |
Ted, those allen screws are used to fine-tune the strings that are simultaneously raised and lowered (the "splits"). Lots and lots of guitars don't have those screws. You may want to start by backing them out so they have no effect on the tuning. Then just use the tuning nuts below to tune the guitar. That'll get you 95% of the way there. Then, when you get the hang of it, move on to Mickey Adams' video that discusses the allen screws. Best of luck!
Tony |
Thanks Anthony....
I left the allen screws alone as some were engaged and some weren't.
The video is excellent.
I had the hex nuts figured out to some degree but the video is excellent.
Thanks again...
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 1 Oct 2021 2:30 pm
|
|
Excellent....thanks Bill
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 1 Oct 2021 6:52 pm
|
|
That row of allen screws on the back of the changer are adjustable stops for the low note using the split tuning. Split Tuning makes this guitar a completely different guitar than a standard. Put split tuning in Google. There is a site I believe Mickey Adams instructs on the split tuning.
I have a friend who got a split tuning guitar. He had problems with the tuning, But once he got it set up, He can get licks that I can not duplicate. |
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 1 Oct 2021 9:14 pm
|
|
| Bobby D. Jones wrote: |
That row of allen screws on the back of the changer are adjustable stops for the low note using the split tuning. Split Tuning makes this guitar a completely different guitar than a standard. Put split tuning in Google. There is a site I believe Mickey Adams instructs on the split tuning.
I have a friend who got a split tuning guitar. He had problems with the tuning, But once he got it set up, He can get licks that I can not duplicate. |
Oh wow...that’s cool...
Definitely interesting...
Thanks Bobby...
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
Norman Evans
From:
Tennessee
|
Posted 2 Oct 2021 5:13 am
|
|
 |
|
|
|
Ted Kyte
From:
Alberta, Canada
|
Posted 2 Oct 2021 8:03 am
|
|
| Norman Evans wrote: |
|
\
Thanks Norman...excellent overview.
Ted
_________________
Emmons LeGrande II Pedal Steel - Brisco Bud Pedal Steel - Mustang GT200 Amp - Peavey Session 115 Amp - Fender Twin Reverb Amp - Gretsch 7700 Guitar - Asher Custom Lap Steel- 2 Paul Beard Resonators - Gretsch Lap Steel |
|
|
|
