Author |
Topic: Wanted: Sho Bud Single Coil Pickup |
Ben Waligoske
From: Denver, CO
|
Posted 3 Sep 2021 8:33 am
|
|
Hey all. Wouldn’t mind having a period correct Sho Bud signal coil around for my ‘73 Round Front Single Pro. If anyone’s hanging onto a good one, let me know.
Thanks!
Ben |
|
|
|
Dan Beller-McKenna
From: Durham, New Hampshire, USA
|
Posted 5 Sep 2021 1:54 am Pickup
|
|
Hi Ben,
I recently acquired a pair of True Tone pick ups not realizing they were narrow mount (needed wide). I could sell you one for $50. These are what I have in my Super Pro and love 'em. I have never used these, so I can't vouch for whether they are working. If it turns out to be dead or non functional, I will happily refund you.
Dan |
|
|
|
Ben Waligoske
From: Denver, CO
|
Posted 5 Sep 2021 3:56 pm
|
|
Thanks Dan, but I’m only interested in a period correct original at this time. Hope the True Tone’s find a good home! |
|
|
|
Gary Patterson
From: Gallatin, TN
|
Posted 7 Sep 2021 7:48 am
|
|
I don't have a good one. How about a bad one? I'll give you this. It meters "open" and has a few stray wires trying to escape. You could have it rewound, or if you have the patience, maybe you can de-wind it back to a point where you can find continuity.
|
|
|
|
John Hyland
From: South Australia
|
Posted 7 Sep 2021 2:37 pm Re: Pickup
|
|
Dan Beller-McKenna wrote: |
Hi Ben,
I recently acquired a pair of True Tone pick ups not realizing they were narrow mount (needed wide). I could sell you one for $50. These are what I have in my Super Pro and love 'em. I have never used these, so I can't vouch for whether they are working. If it turns out to be dead or non functional, I will happily refund you.
Dan |
Not to derail the thread but how do these true tones compare in sound to the original Shobuds |
|
|
|
Dan Beller-McKenna
From: Durham, New Hampshire, USA
|
Posted 7 Sep 2021 3:08 pm
|
|
John, these (which sold on the Forum yesterday) were a little hotter (@20kohm). I had a new one made for a 6139 a while back, would to somewhere around 18, and it sounded identical to the original (to my ears, anyway). |
|
|
|
John Hyland
From: South Australia
|
Posted 8 Sep 2021 1:27 am
|
|
Dan Beller-McKenna wrote: |
John, these (which sold on the Forum yesterday) were a little hotter (@20kohm). I had a new one made for a 6139 a while back, would to somewhere around 18, and it sounded identical to the original (to my ears, anyway). |
Thanks Dan |
|
|
|
John Hyland
From: South Australia
|
Posted 8 Sep 2021 1:31 am
|
|
Gary Patterson wrote: |
I don't have a good one. How about a bad one? I'll give you this. It meters "open" and has a few stray wires trying to escape. You could have it rewound, or if you have the patience, maybe you can de-wind it back to a point where you can find continuity.
|
Hi Gary just to let you know I sent you an email
John |
|
|
|