| Author |
Topic: Presonus Quantum series compatibility |
Ian Rae
From:
Redditch, England
|
Posted 29 Aug 2021 7:53 am |
|
Does anyone know if the Presonus Quantum series audio interfaces can operate via a USB-3 port, or whether a Thunderbolt-enabled connection is necessary.
Thanks
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
 |
mtulbert
From:
Plano, Texas 75023
|
Posted 30 Aug 2021 4:09 am
|
|
Ian,
This is what the spec sheet from Presonus says
Computer system requirements:
Below are the minimum computer-system requirements for the Quantum 2626 Interface.
Windows®
Windows 10 (64-bit only)
Intel® i5 processor or better
4 GB RAM (8 GB or more recommended)
Mac®
macOS® 10.13 or higher (64-bit only)
Intel i5 processor or better (Apple Silicon M1 support requires Universal Control 3.4.2 or later)
​4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
Thunderboltâ„¢ 1.0, 2.0, or 3.0 port (NOTE: Your computer's motherboard must support Thunderbolt. Thunderbolt 1 and 2 require an adapter, not included.)
Internet connection (required for Studio One® activation and content download)
Internal or external 7200 RPM storage drive highly recommended
30 GB hard disk space
Monitor with 1366x768 resolution
It appears that Thunderbolt is the only way to go.
Hope this helps..
_________________
Mark T
Infinity D-10 Justice SD-10 Judge Revelation Octal Preamp, Fractal AXE III, Fender FRFR 12 |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 30 Aug 2021 5:11 am
|
|
It does. Many thanks.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
