| Author |
Topic: Mullen G2 SD10 4x5 *** SOLD |
Dave Welch
From:
Latrobe PA USA
|
Posted 5 Aug 2021 12:57 pm |
|
Super condition, bought new in Nov 2019 and used either at home or the occasional country jam night at the local Civic Center. I've taken great care of this instrument, as the pictures will show.
It is set up 1" over (I'm 6'2). If you're in need of the extra height, this will work fine for you. If you require standard height, this one is an easy fix. The legs have the traditional 1" long wooden dowels inside to extend the length, so just take the legs apart and remove them. Then remove the 2 collars on the 2 front legs that provide extra spacing for the pedal bar (each held in place by a set screw). That makes everything standard again with the legs.
Then the only other thing to change will be the pedal rod length. You can either order standard length rods from Mullen, or see if they will cut and rethread these ones, not sure which which would cost less. Another option obviously would be to run a 10-32 die on them an extra inch further, then cut them to the new shorter length yourself, if you have the tooling and are comfortable doing it, or know someone who can.
Copedent shown in one of the photos. Currently the pad is a solid color brown vinyl. Originally I had Mullen put a wild alligator vinyl on it (see photos), but later wrapped and stapled on a more "conservative" look, which is how it will ship. If however you do happen to like the gator design, you can just take the pad off and remove the staples and underneath you'll find it waiting for you. I wanted to keep that option open so I left the original alone underneath. Pickup is a BL-705. There is also a color matched Sharp cover that will come with the guitar.
Original Mullen case.
Any questions please PM me and I'll try to answer whatever I can as soon as possible.
$3200 plus shipping to CONUS.
_________________
Psalm 33:2 Maybe they did have steels back then...
Last edited by Dave Welch on 7 Aug 2021 9:32 am; edited 1 time in total |
|
|
 |
Ron Pruter
From:
Arizona, USA
|
Posted 5 Aug 2021 8:27 pm
|
|
Why hasn't this incredible guitar at a good price sold?
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Robert Rhea
From:
Panama City, Florida, USA
|
Posted 6 Aug 2021 11:05 am
|
|
Email sent...
_________________
***Bob*** |
|
|
|
Tony Edwards
From:
Six Mile, South Carolina
|
Posted 6 Aug 2021 3:30 pm Mullen
|
|
Dave,
This steel guitar is a beauty to behold! I love the color scheme and the alligator pad. Gorgeous! If I had the money, I would jump on this!
Tony
_________________
ZumSteel SD10; CLR Custom SD10; Telonics 500-B w/ TT 15; Hilton Low Profile VP; Frenchy's Steel Mill Strings; George L's Cables; BJS Tone Bars; Hoffmeyer Picks. This combination produces a Heavenly tone! Psalm 33:2 "Praise the Lord with...an instrument of ten strings." |
|
|
|
Dave Welch
From:
Latrobe PA USA
|
Posted 6 Aug 2021 5:19 pm Sold ... Please Close
|
|
Got several PM's from those inquiring about the guitar. This one is now sold. Thanks to all interested! Forum donation to follow.
_________________
Psalm 33:2 Maybe they did have steels back then... |
|
|
|
Paul Awalt
From:
Greenwich, Ct.
|
Posted 7 Aug 2021 8:28 am Mullens
|
|
| Was that real Gator skin? Looks awesome either way. |
|
|
|
Dave Welch
From:
Latrobe PA USA
|
Posted 7 Aug 2021 8:48 am Gator skin
|
|
No it was vinyl I got from JoAnn Fabrics lol. Sent it in to Mullen to put it on when they built the guitar.
(Which was actually Nov. 2018, not 2019 as posted above). I just noticed that as I was reading it through again. My mistake, wasn't being dishonest, I guess I just had what is referred to as a "senior moment". 
_________________
Psalm 33:2 Maybe they did have steels back then... |
|
|
|
