| Author |
Topic: RKL "sticks" out of tune until I press the B pedal |
Patrick Little
From:
Texas, USA
|
Posted 26 Jul 2021 9:39 am |
|
After re-stringing my guitar: when I press and release the RKL lever, my 6th string stays a little flat until i press my B pedal.
Where do I start to debug this?
Guitar is Mullen Discovery 3/4 E9 tuning |
|
|
 |
Ben Waligoske
From:
Denver, CO
|
Posted 26 Jul 2021 10:04 am
|
|
Is RKL lowering your 6th string? This is a common problem called "hysterisis" - you can probably find some deeper threads discussing it if you search the forum here.
Practically though, the most straightforward way to combat this is to make sure your changer fingers and roller nut are properly lubricated and free of any debris. It's also possible that your return spring on 6 (if you have one) could use a slight tightening. |
|
|
|
Terry Pendlay
From:
Effingham Illinois, USA
|
Posted 26 Jul 2021 11:06 am strings
|
|
| I had the same thing happen. i changed the 6 string again.. and loosen all the nylon tuners on the 6 string. then retune the 6th string,,,, all good now |
|
|
|
Patrick Little
From:
Texas, USA
|
Posted 26 Jul 2021 3:06 pm
|
|
| Loosing the nylon tuners, tightening the very loose return spring, and tuning it back up seemed to do the trick. thanks yall |
|
|
|
