Peavey Special 130 question.

Darvin Willhoite · From: Roxton, Tx. USA

I am putting a Peavey Special 130 back together in a custom cabinet, and the reverb Molex plug will go either direction. Usually, the Peavey amps have a notch at the end of the slot where the Molex plugs in, that matches the pointed side of the Molex. But, this Special 130 does not have that notch. If anyone has a Special 130 handy, can you tell me if the pointed side of the plug goes toward or away from the power transformer? Your help will be appreciated.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.

Kerry Johnson · From: the Bay Area, CA

Hi Darvin,

You might consider calling Peavey Repair and asking them.
They are usually helpful.

Best!
~Kerry Johnson

Clyde Mattocks · From: Kinston, North Carolina, USA

I don't think you would hurt anything to try it both ways and see which sounds best. I do that all the time with no problem.
_________________
LeGrande II, Nash. 112, Fender Twin Tone Master, Session 400, Harlow Dobro, R.Q.Jones Dobro

Pat Kane · From: Delaware, USA

Mine has the point facing away from the transformer

Ken Fox’s orientation diagram

Darvin Willhoite · From: Roxton, Tx. USA

Thanks Pat, that is exactly what I needed.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.

Pat Kane · From: Delaware, USA

You’re welcome, Darvin. Would love to see a finished photo. I’m planning on putting my 130 in a new cab as well in the near future.

Darvin Willhoite · From: Roxton, Tx. USA

Pat, I finally got some pics of the cabinet I built for the Special 130. I started building this for a Bandit 65 chassis I have, but I ran across a Special 130 working chassis, so I bought it. I had to replace the filter caps and buy a reverb spring unit, but it all works great now.

_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.

Pat Kane · From: Delaware, USA

Wow, now that is cool! Beautiful work. The logo offset in the corner really sets it off.

Darvin Willhoite · From: Roxton, Tx. USA

I never understood why Peavey put the logo directly in front of the top of the speaker. I've built several cabinets and I always move it over to the side.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.

Bill A. Moore · From: Silver City, New Mexico, USA

That looks nice, Darvin! I did one a few years ago, but since my woodworking skills aren't as good as yours, I covered mine with tolex!

Darvin Willhoite · From: Roxton, Tx. USA

I have a few “bobbles” on this one if you look close. I don’t see quite as well as I used to and it shows.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.

Larry Dering · From: Missouri, USA

That's a great looking cabinet. Nice work.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: