Thumbscrews for Sierra

Dwight Lewis · From: Huntsville, Alabama

I'm looking for thumbscrews for Sierra keyless tuner and leg adjust. I believe that they're 4-40Ã—3/4" and 1/4/28Ã—5/8"...

_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn

Pat Moore · From: Virginia USA

Dwight,
Most hardware stores should have those. Ace or Lowes or Home Depot or even smaller local stores. Just saw some similar yesterday at my local independant store.
The same goes for the rubber feet for the legs. I buy mine at Ace for around $4-6 for 4. Take an old one with you, or a leg if you don't have any old ones.
All the best, Pat

Tommy Cass · From: Baldwinville, Ma. U.S.A.

Dwight, here's where you can get them.
https://www1.mcmaster.com/thumb-screws/thread-size~6-32/length~1/head-type~thumb/thumb-screw-head-shape~round/head-diameter~3-8/

Jim Palenscar · From: Oceanside, Calif, USA

The keyless tuner screws frequently are 6-40 and 7/8" and 1".

Dwight Lewis · From: Huntsville, Alabama

Thank you all for your help. I picked up the legs rubber feet at Ace. Lowes and Honeypot have nothing for screws.... I'll try Ace in a minute... if nothing I'll order from McMasters... thanks for the correct size and pitch.

Dwight
_________________
Dekley 7p4k(PRS-10C), BMI S12 5p5kn

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: