| Author |
Topic: Tone Pot |
Carl McLaughlin
From:
St.Stephen,New Brunswick,Can
|
Posted 15 Jun 2021 12:37 pm |
|
I have a Supro Airline lap steel that needs a new Tone pot,any suggestions?,don't know what is in there. Maybe needs a new cap? If i work the tone ,there is no diff in sound.
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.Just bought back my old SX lap steel that i modified, in open G |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
|
|
|
Carl McLaughlin
From:
St.Stephen,New Brunswick,Can
|
Posted 19 Jun 2021 4:14 am tone pot
|
|
Thanks Donny,i haven't looked yet but will get to it soon.
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.Just bought back my old SX lap steel that i modified, in open G |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 19 Jun 2021 6:21 am Tone pot - audio vs. linear taper
|
|
| One other thing, Carl. If you want an "even and smooth" tone control operation, then you'll want to use a linear taper pot. But if you want a faster tone change, like for a "doo-wah" effect, then you'll want to use an audio taper pot. It's all personal preference, based on the type of action you're looking for. |
|
|
|
