Author |
Topic: Legs rubber feet |
Dwight Lewis
From: Huntsville, Alabama
|
Posted 21 Jun 2021 3:09 pm
|
|
Looking for the little rubber feet for the steel guitar legs.
Thanks _________________ Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Roger Crawford
From: Griffin, GA USA
|
Posted 21 Jun 2021 3:29 pm
|
|
Get with Bill Ferguson. He’s a George L dealer and that’s a product he stocks. |
|
|
|
George Kimery
From: Limestone, TN, USA
|
Posted 21 Jun 2021 3:37 pm Legs rubber feet
|
|
My Ace Hardware has them, 4 in a pack. 5/8" rubber crutch tips. |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
Posted 21 Jun 2021 3:44 pm
|
|
I like these. Steel Guitar Network seller on eBay. clickhere |
|
|
|
George Kimery
From: Limestone, TN, USA
|
Posted 21 Jun 2021 4:32 pm Legs rubber feet
|
|
My local Ace Hardware has them. 5/8" rubber crutch tips. 4 in a pack. |
|
|
|
Dwight Lewis
From: Huntsville, Alabama
|
Posted 21 Jun 2021 7:38 pm Rubber feet
|
|
I'll stop by Ace hardware before ordering.
Thanks gentlemen.
Dwight _________________ Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Tommy Allison
From: Transfer, Pennsylvania, USA
|
Posted 22 Jun 2021 8:15 am
|
|
Dwight, If you insert a washer just snug fitting enough as to not fall out of each tip before installing them on the guitar, they will probably last for ever if not longer. |
|
|
|
Dwight Lewis
From: Huntsville, Alabama
|
Posted 22 Jun 2021 9:11 am Rubber feet
|
|
Thanks all, I found some.
Dwight _________________ Dekley 7p4k(PRS-10C), BMI S12 5p5kn |
|
|
|
Ron Pruter
From: Arizona, USA
|
Posted 22 Jun 2021 7:20 pm
|
|
Hope they are rubber and not plastic. Plastic slips all over the place. _________________ Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Nick Reed
From: Russellville, KY USA
|
Posted 24 Jun 2021 6:19 am
|
|
most any Hardware store has them |
|
|
|