| Author |
Topic: Need a part for a Zum |
Jerry Miller
|
Posted 27 May 2021 7:26 am |
|
| I am looking for the rod that raises Str 1 E9 up a whole step mine just snapped at the roll pin inside the bell crank. 85 Zum the right knee left lever is what is used to raise. I can provide pics if needed w/measurements. |
|
|
 |
George Kimery
From:
Limestone, TN, USA
|
Posted 27 May 2021 6:13 pm Need a part for a Zum
|
|
| You can make it if you have a drill press. I made a few when I had a Zum. It's really not worth the set-up for one rod. PSG parts should be able to to take care of you |
|
|
|
Morton Kellas
From:
Chazy, NY, USA 1
|
Posted 28 May 2021 7:14 am
|
|
| Jerry, I may have what just what you need. Please send me the length of the rod. If what I have is too long, you could just cut it and thread the end, they are from a Zum. |
|
|
|
Jerry Miller
|
Posted 28 May 2021 7:34 am
|
|
Morton, I just sent you an email.
Jerry |
|
|
|
Morton Kellas
From:
Chazy, NY, USA 1
|
Posted 28 May 2021 8:30 am
|
|
| Jerry, I emailed you back. The rod I have is just under 9" and may be just a tad longer but should work. |
|
|
|
Jerry Miller
|
Posted 28 May 2021 10:52 am
|
|
| This thread can be closed Morton Kellas has come to my rescue he has went above and beyond I will have my new rod in a few days. It is nice to know that I am a part of this steel guitar brotherhood. A big huge Thank you to Morton Kellas for his help and the rod. |
|
|
|
