| Author |
Topic: Sierra S-10 Crown **Please close, no interest on the Forum * |
Al Meyers
From:
Downey, California
|
Posted 16 Apr 2021 4:15 pm |
|
Cleaned up, shined up, switches re-connected. Original owner.
The front panel is grey in color. It looks white in the photo.
1) Extra set of strings that came with the guitar
2) New set of GHS strings
3) Dunlop tone bar
4) Extra fretboard, not pristine, but very good.
5) Socket wrench
6) 2 extra rods
7) Owners manual
 Extra hex bolts for the knee levers, not for tuning.
9) I moved the fret board back slightly for ease of playing when I first got it.
10) Slight lift on one corner of the fret board
11) Tiny crack in the Formica near the thin part of the pickup slot that was there when I took delivery. It's been touched up and is not noticeable (I've heard about this on other Sierra steels.)
Last edited by Al Meyers on 19 Jul 2021 7:47 pm; edited 69 times in total |
|
|
 |
Tom Mooney
From:
Arlington, TN, USA
|
Posted 18 Apr 2021 3:22 pm
|
|
| Is this a triple raise/double lower changer? |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 21 Apr 2021 8:00 am Sierra S-10 Crown 4 X 5
|
|
| Thanks Tom, Yes, triple raise/double lower changer. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 21 Apr 2021 8:20 am
|
|
| Wow nice looks brand new. |
|
|
|
Jeff Rady
From:
Colorado, USA
|
Posted 21 Apr 2021 8:29 am
|
|
Just PM'ed
_________________
Williams Guitar Purveyor, Owner of jeffsguitarandsteel.com |
|
|
|
Tom Mooney
From:
Arlington, TN, USA
|
Posted 21 Apr 2021 6:17 pm
|
|
| If still available, I have a flat top Gibson I’d trade in part for your Sierra. I believe it’s an L6 about 50 to 60 years old. |
|
|
|
Jim Uhler
From:
West Virginia, USA
|
Posted 22 Apr 2021 6:11 am S.g.
|
|
| NICE ! ( plays like butter ) !! |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 24 Apr 2021 8:55 pm Re: S.g.
|
|
| Jim Uhler wrote: |
| NICE ! ( plays like butter ) !! |
Yes, plays very smoothly and hard to beat the sound of a Sierra! |
|
|
|
Jim Uhler
From:
West Virginia, USA
|
Posted 25 Apr 2021 5:36 am s.g.
|
|
| Would BUY this S/G but me and the MULLEN would be at the |
|
|
|
Jim Uhler
From:
West Virginia, USA
|
Posted 25 Apr 2021 5:37 am S.g.
|
|
| CURB !! |
|
|
|
Alfred Navarro
From:
San Bernardino, California
|
Posted 30 Apr 2021 10:34 am
|
|
I live in the Inland Empire and would like to try it out. Call me any time.
Alfred Navarro
(909) 821-1381
_________________
89 Emmons Legrande 8x7, Goodrich Omni, Quilter Steelaire, TC Electronics Flashback Triple Delay, StroboPlus HD |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 10 May 2021 10:26 am Sierra S-10 Crown 4 X 5
|
|
| Alfred Navarro wrote: |
I live in the Inland Empire and would like to try it out. Call me any time.
Alfred Navarro
(909) 821-1381 |
|
|
|
|
Chris Harvey
From:
California, USA
|
Posted 10 May 2021 11:46 am
|
|
| 25" scale? |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 10 May 2021 2:28 pm Sierra S-10 Crown 4 X 5
|
|
| Chris Harvey wrote: |
| 25" scale? |
Yes this is a 25" scale. |
|
|
|
Chris Harvey
From:
California, USA
|
Posted 10 May 2021 3:03 pm
|
|
| Oh the tone. |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 10 May 2021 3:11 pm Sierra S-10 Crown 4 X 5
|
|
| Chris Harvey wrote: |
| Oh the tone. |
Yes sir! Great sounding steel! |
|
|
|
Foster Haney
From:
Ojai, CA
|
Posted 11 May 2021 8:52 pm
|
|
Wow! That’s my dream guitar right there! Beautiful. Same year as me too.
_________________
1975 MSA Classic, AA1164 Princeton clone, Quilter Tone Block 202, Custom Warmoth Jazzmaster, two Kazou Yairi Alvarez Acoustics from the 80's, Acme Low B2 bass cab. |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 30 Jun 2021 5:12 pm Re: Sierra S-10 Crown 4 X 5
|
|
More photos coming.
Last edited by Al Meyers on 13 Jul 2021 11:05 pm; edited 3 times in total |
|
|
|
Robert Lashier
From:
Arizona, USA
|
Posted 1 Jul 2021 5:46 am
|
|
| Lottery ticket purchased. |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 12 Jul 2021 9:10 am
|
|
| Robert Lashier wrote: |
| Lottery ticket purchased. |
Great guitar! |
|
|
|
Lynn Kasdorf
From:
Waterford Virginia, USA
|
Posted 12 Jul 2021 9:34 am
|
|
What is the weight of this steel?
_________________
"You call that thing a guitar?" |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 12 Jul 2021 9:52 am
|
|
| Lynn Kasdorf wrote: |
| What is the weight of this steel? |
Not certain. Heavy, but not terribly heavy. |
|
|
|
Lynn Kasdorf
From:
Waterford Virginia, USA
|
Posted 12 Jul 2021 12:36 pm
|
|
| Al Meyers wrote: |
| Lynn Kasdorf wrote: |
| What is the weight of this steel? |
Not certain. Heavy, but not terribly heavy. |
I'll tell that to the airlines as they check it as baggage. I'm sure they won't charge me an overweight fee.
_________________
"You call that thing a guitar?" |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 12 Jul 2021 1:31 pm
|
|
| Lynn Kasdorf wrote: |
| Al Meyers wrote: |
| Lynn Kasdorf wrote: |
| What is the weight of this steel? |
Not certain. Heavy, but not terribly heavy. |
I'll tell that to the airlines as they check it as baggage. I'm sure they won't charge me an overweight fee.
|
That might not work. I think it's probably 40 lbs. I don't want to set it on my postal scale, but that would be my guess. |
|
|
|
Ron Pruter
From:
Arizona, USA
|
Posted 13 Jul 2021 5:18 pm
|
|
Is that not some sort of Telonics pick up?
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
