How far

Jimmy Gibson · From: Cornwall, England

Could someone please give me the distance from the changer end to the 8th Pedal crosshaft.on the C6th .

Cheers...Jimmy.

Erv Niehaus · From: Litchfield, MN, USA

I don't think there is any set distance.
It would vary builder by builder.
Erv

Bob Tuttle · From: Republic, MO 65738

Jimmy, on a Carter D-10 the distance from the outside of the end plate to the center of the 8th pedal cross shaft is 11 and 1/4 inches.

Jimmy Gibson · From: Cornwall, England

Thanks Bod and Erv,very much appreciated.

Jimmy.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: