Low Profile Pickup?

Marty Broussard · From: Broussard, Louisiana, USA

Anyone aware of a pickup being offered that is not as tall as the typical pup?! Something like the Lace for Dobro would be ideal but for 10-strings. Thanks for any coaching.
_________________
RETIRED

"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin

Jack Hanson · From: San Luis Valley, USA

Check in with Christine & Jerry Sentell in Sacramento. Their NC-18 model might work for you. If not, Jerry can and will build most anything you want.

https://www.sentellpickups.net/Steel.html

Marty Broussard · From: Broussard, Louisiana, USA

Thank you!
_________________
RETIRED

"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin

Gary Cosden · From: Florida, USA

Steeltronics made me a really nice low profile version of their single coil. I like it a lot. He used, I believe, 5/8" magnets instead of 3/4".
https://bb.steelguitarforum.com/viewtopic.php?t=358735&highlight=

John Swain · From: Winchester, Va

Marty, the alumintones(sp) are thinner than most!

Roman Sonnleitner · From: Vienna, Austria

I use this one on an 8-string Fender 400, but it should be wide enough for 10 strings, too!

https://lacemusic.com/products/lace-ultra-slim-acoustic-bass

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: