Author |
Topic: Session 500 amp settings |
Craig Bailey
|
Posted 18 Mar 2021 3:37 am
|
|
What amp settings do you guy use for a Session 500? Especially those playing with Emmons push pull through a Session 500.
Thanks
Craig _________________ ________________
Mullen G2, Mullen Discovery, GFI D10 Ultra,
'76 Rosewood Emmons PP, '79 Black Emmons PP
Telonics Amp, Stereo Steel, Fender Vibrasonic & many Telecasters (You can't have too many) |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 18 Mar 2021 4:50 am
|
|
When I got my Session 500, I still had a D-10 Emmons PP with the stock Emmons single coil pickups and using an Emmons volume pedal.
The settings I used were
Low +9
Mid 800Hz and -2 to -3
High and Presence 0 to +1
FWIW, when I got the Franklin D-10 with Lawrence 705 pickups (and still using the Emmons Volume pedal) I used the same settings, and later switched to George L's cables and still wound up with the same settings. |
|
|
|
John Limbach
From: Billings, Montana, USA
|
Posted 18 Mar 2021 5:07 am
|
|
|
|
|
|