Author |
Topic: 3 way switch on a pickup |
Bobby Harris
From: Kentucky, USA
|
Posted 10 Feb 2021 7:36 am
|
|
How do you hook 3 way switch on a pickup you may not can but I was wondering if you can. Thanks |
|
|
|
Bill Ferguson
From: Milton, FL USA
|
Posted 10 Feb 2021 7:42 am
|
|
You need to explain a little more.
Are you trying to hook up a 3 way switch for a D10 so that you can switch between pickup?
I have never heard of using a 3 way switch on a single pickup. What would be the reason? _________________ AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 10 Feb 2021 8:50 am
|
|
Some humbucking pickups have separate leads for each winding. You could have, for example winding #1 to one connection on the switch, winding #2 to another connection on the switch and both connected on the 3rd switch option. Basically wiring an "on-on-on" switch the way a D-10 is wired. I don't know if the two different windings would produce any difference in tone, but a single coil pickup and a dual coil humbucker will have some difference. |
|
|
|
ajm
From: Los Angeles
|
Posted 10 Feb 2021 9:02 am
|
|
We don't know what your are trying to do.
We don't know if you have an S10 or a D10.
We don't know what pickup you have.
To rephrase what Jack said............
Some pickups have 3 leads, some have 4.
Let's assume that we're talking 3.
You could possibly wire it up:
1) Full humbucking.
2) Coil tapped/split for a thinner/more trebly single coil sound.
3) And MAYBE (the experts can weigh in on this) wire it up so that both coils are in parallel. I wouldn't count on this one, though. It MIGHT give you a thinner sound, but with the added perk of being noise cancelling (humbucking). This is easier to do with 4 leads as found on a lot of 6 stringer humbucking pickups. |
|
|
|
D Schubert
From: Columbia, MO, USA
|
Posted 10 Feb 2021 7:14 pm
|
|
Or, you could hook up a single pickup the same way that a Fender Esquire is wired, with a three-way switch, volume, and tone controls...... |
|
|
|
Bobby Harris
From: Kentucky, USA
|
Posted 11 Feb 2021 11:25 am 3 way switch
|
|
Schubert I thank you hit the nail on the head. Thanks everyone |
|
|
|
Wiz Feinberg
From: Mid-Michigan, USA
|
Posted 13 Feb 2021 9:15 am
|
|
I bought a pair of L-705 wide mounts that have split coils. I intended to replace the LXR-16s that are in my Emmons, but never figured out how to wire a 5 way lever switch to utilize the split coils. Any help with a schematic would be appreciated. In the meantime my old pickups are still in the guitar, with their 3 way lever switch.
I will start a new topic about this project. _________________ "Wiz" Feinberg, Moderator SGF Computers Forum
Security Consultant
Twitter: @Wizcrafts
Main web pages: Wiztunes Steel Guitar website | Wiz's Security Blog | My Webmaster Services | Wiz's Security Blog
Last edited by Wiz Feinberg on 14 Feb 2021 1:12 pm; edited 1 time in total |
|
|
|
Godfrey Arthur
From: 3rd Rock
|
Posted 14 Feb 2021 9:33 am
|
|
Then there's the 5 way 10 position Free Way switch.
Just to introduce this marvel of electronic gadgetry.
Check out the PDF for the posibilities.
https://www.stewmac.com/freeinfo/i-2058/free-way_diagrams.pdf
Unless as mentioned if you're using a single pickup using a switch will involve the pickup being wound with multi-taps which means there are separate leads that come off the pickup to make the pickup work at different numbers of windings.
A normal Strat pickup has 8,000 windings (turns) so tapping would take a lead at say 4,000 windings and then at 8,000 to get you two leads or taps.
If no multi-taps, then you'll need two pickups to justify using a switch as in most guitars with more than one pickup.
The single coils in the photo below show three wires coming from each single coil pickup on a Tele.
Or if it's a humbucker, you can coil tap those as it will be inherently a "two pickup" device.
This is best done with a humbucker already set up for coil tapping.
_________________ ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7 |
|
|
|
D Schubert
From: Columbia, MO, USA
|
Posted 14 Feb 2021 12:46 pm
|
|
My Telecaster body, Loni Specter square neck, one single-coil pickup. I originally installed an overwound guitar pickup with Fender Esquire circuit. The volume-only and volume-tone positions were musically useful, the third position with bassy capacitor was very muddy. I rewired to give me a wide-open bypass position, volume-only, and volume-tone. That was better, especially with a volume pedal. More recently, I found a triple-tapped single coil pickup that is even more to my liking (Don Mare Stingray).
Last edited by D Schubert on 14 Feb 2021 12:56 pm; edited 1 time in total |
|
|
|
Thomas Stone
From: San Francisco
|
Posted 14 Feb 2021 12:55 pm
|
|
Numerous options available for using a 3-way switch with a single pickup.
If it's a humbucker, you can wire it for series, parallel, coil split, or out of phase.
If it's a single coil, an option would be a 3-position tone control.
As usual, it all depends on what you're trying to achieve. |
|
|
|