Bl 712 Pu

autry andress · From: Plano, Tx.

My friend just got a BL 712 PU 3 wires with no hook up
Instructions.
Please help.
Thanks in advance.
Autry

George Macdonald · From: Vancouver Island BC Canada

Autry,
My BL XR-16 came with 3 wires also. I was told by Becky at BL that you don't need to use the red wire unless you are going to use a "coil tap". I just coiled the red wire up and connected just the black and white wires. The XR-16 sounds very good in my Carter U12.

Richard Sinkler · From: aka: Rusty Strings -- Missoula, Montana

Yup the red wire is to tap the coil giving you either a humbucker or single coil. I put an XR-16 into a Mullen I used to have. I wired a spst switch to the red wire and the other side to ground (I used the ground on the jack). I liked the single coil best, but there are those gigs where a single coil buzzes. Switching to humbucker takes care of that problem.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: