| Author |
Topic: Changing the pickup on my Zum |
Edward Efira
From:
California, USA
|
Posted 18 Jan 2021 5:51 pm |
|
One of the things I've never messed with before.
I know how to use a soldering iron from when I was making my own cables.
How hard is it?
Are there some specific steps I should take to make it right?
Answers or step by step instructions would be much appreciated.
_________________
<small><b>'75 Sho-Bud 4&4, '01 Zumsteel 8&8, 2012 Zum Hybrid 4&6</b></small> |
|
|
 |
gary pierce
From:
Rossville TN
|
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 19 Jan 2021 5:32 am
|
|
There are numerous different attachment and adjustment methods used by different makers. If you are dealing with wood or machine screws with springs, this was a good little trick I used last time I dealt with it to keep the spring in place and to stabilize and straighten the screw a bit. Not a miracle but it takes a little bit of the aggravation out of it.
https://bb.steelguitarforum.com/viewtopic.php?t=327795 |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
Posted 19 Jan 2021 7:49 am
|
|
Check this out. Since then, I went away from the toggle to the micro wires.
CLICK HERE
CLICK HERE
Ron |
|
|
|
Edward Efira
From:
California, USA
|
Posted 19 Jan 2021 4:56 pm
|
|
You guys are great, Thanks so much for the tips! priceless!
_________________
<small><b>'75 Sho-Bud 4&4, '01 Zumsteel 8&8, 2012 Zum Hybrid 4&6</b></small> |
|
|
|
