| Author |
Topic: Shallow mount 1/4" panel mount jack |
Louie Warren
From:
Sumerduck, VA, USA
|
Posted 3 Dec 2020 9:52 am |
|
| I have a National D8 console. The original screw on jack disintegrated and I replaced it with a standard SwitchCraft. It skews the metal plate everything is attached to, out about a 1/2" or so. It works, but I'd like to have it back where the screw on connector was. I know I can rout it out a bit and make the SwitchCraft work, but I'd rather not do any further damage to it. Is there a more shallow 1/4" jack that can fit there and do the job? Thanx! |
|
|
 |
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 8 Dec 2020 4:24 pm
|
|
| i just replaced the screw connector on one of those guitars with a regular switchcraft 1/4". rout it and you will be fine. |
|
|
|
Louie Warren
From:
Sumerduck, VA, USA
|
Posted 9 Dec 2020 5:37 am
|
|
| Thanx. I wanted to avoid the rout, but since I've already bastardized it by changing the jack and tuners, I guess it's no big deal. Thanx! |
|
|
|
