| Author |
Topic: GeorgeBoards no intetrest please close |
Timothy Brown
From:
Idaho, USA
|
Posted 1 Dec 2020 3:28 pm |
|
NO INTEREST PLEASE CLOSE
Last edited by Timothy Brown on 15 Mar 2022 11:29 am; edited 10 times in total |
|
|
 |
Timothy Brown
From:
Idaho, USA
|
Posted 7 Dec 2020 8:41 am
|
|
| price drop |
|
|
|
Richard Stanton
From:
England
|
Posted 10 Dec 2020 1:21 pm George Board 8 string Lap Steel
|
|
| PM sent |
|
|
|
John Viterito
From:
New Jersey, USA
|
Posted 16 Jun 2021 4:09 pm
|
|
Is this still available?
_________________
Emerald Solace acoustic laps and Rukavina steels. Can't play, but I try! |
|
|
|
Timothy Brown
From:
Idaho, USA
|
Posted 17 Jun 2021 5:52 am
|
|
| Yes it is .Thanks for asking. |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 17 Jun 2021 8:16 am Good Deal
|
|
Some one is going to get an amazing deal at this price. IMO you should be raising , not lowering for forum deal seekers.
I paid 300 for the case alone in 2006 dollars.
We made only 2 of this with the sunburst, this also has our roller pin system, all set in place with metal dowel pins for extreme accuracy.
Since I am the original manufacturer, I get to declare current pricing Value, which is 2500.00 usd
I have retired from making these and no more will ever be made again by me. The collectibility of this is increasing not decreasing.
Hope this helps
George Boards.
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel |
|
|
|
Timothy Brown
From:
Idaho, USA
|
Posted 17 Jun 2021 9:03 am
|
|
| Thanks George |
|
|
|
John Viterito
From:
New Jersey, USA
|
Posted 18 Jun 2021 2:19 pm
|
|
George, are the notches in the nut generic "V" cuts, or are they custom to the string gauges on the guitar (tuning)? Thanks.
_________________
Emerald Solace acoustic laps and Rukavina steels. Can't play, but I try! |
|
|
|
George Piburn
From:
The Land of Enchantment New Mexico
|
Posted 19 Jun 2021 3:31 am V Grooves
|
|
Both of the brass pins were precision CNC Lathed, we start with an over sized brass rod ,
and turn it down to the final diameter to get them more round than standard stock from a metal supply.
That added a lot of initial production cost.
The V Grooves are gauged deeper as they get fatter.
The Nuts and bridges on these series of GeorgeBoards were all set up so that the tops of the strings are higher than the top of the brass.
Of course all at micro measurements in thousands of an inch tolerances.
The intension was to accommodate the "Hawaiian" desire to pull on or push off of fret one to or from Zero below the nut.
This allows for a glide into the sunset off to the tuner end of the neck.
Without the inherent Clank of smacking the nut with a tone bar, because the string depths are cut deeper into the nut material as is typical on normal standard guitars.
Have I said too much?
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel |
|
|
|
Timothy Brown
From:
Idaho, USA
|
Posted 17 Jan 2022 1:04 pm
|
|
| re posting for sale |
|
|
|
Timothy Brown
From:
Idaho, USA
|
Posted 11 Feb 2022 4:05 pm
|
|
| OPEN TO FAIR OFFERS |
|
|
|
