| Author |
Topic: Steeltronics Pickups Launches Our E-Commerce Website |
Scott Swartz
From:
St. Louis, MO
|
Posted 16 Nov 2020 6:53 pm |
|
Over the last few months I have introduced a new line of steel guitar pickups, the Z Series, which are based on the design used on vintage ZBs, and also the CE and CS series, which are classic single coils with 1/4 diameter magnets similar to Emmons and Truetone pickups. There are threads in Buy And Sell for the pickups here:
https://bb.steelguitarforum.com/viewtopic.php?t=358735
https://bb.steelguitarforum.com/viewtopic.php?t=361409
The reason for this post is I have finally got an e-commerce website together for all my pickup offerings, which can be accessed at
www.steeltronics.com
It has all the information, options, and secure online ordering. Check it out!
_________________
Scott Swartz
Steeltronics - Steel Guitar Pickups
www.steeltronics.com |
|
|
 |
Marco Schouten
From:
Amsterdam, The Netherlands
|
Posted 17 Nov 2020 6:07 am
|
|
It looks good!
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo |
|
|
|
Patrick Timmins
From:
Seattle
|
Posted 28 Nov 2020 7:22 pm
|
|
Outstanding!
Any chance one of these can be shoehorned into a Sierra modular housing? I can 3D print a base or send an original empty Sierra housing (without electrical contacts). Alternatively, I can make an engineering print and STL or IGS (IGES) file if that will help.
Thanks for making these Scott. I love the sound of my ZB, just too heavy to move around much.
_________________
Microphones, Recording, and lots of pedal steel guitars! |
|
|
|
Scott Swartz
From:
St. Louis, MO
|
Posted 28 Nov 2020 7:43 pm
|
|
Patrick,
I played Sierras for quite a while and happen to have an old pickup laying around that was mounted in a Sierra carrier. I can confirm that a Z pickup would fit in the carrier, and I would be interested in offering a version for Sierras for sure! How about emailing me at scott_swartz@hotmail.com and we can figure out the particulars. Also, I think it might be possible to put the contacts and dovetail mount right in the pickup base and eliminate the need for the carrier. I had already been thinking about this and someone else contacted me on this topic so lets see what we can do.
_________________
Scott Swartz
Steeltronics - Steel Guitar Pickups
www.steeltronics.com |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 29 Nov 2020 4:35 am
|
|
| Looks great! |
|
|
|
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 14 Dec 2020 2:32 pm
|
|
I have the Z series pickups in my new Sierra, Williams keyless and Williams keyed. Very smooth and a nice vibe. Bravo!
_________________
I survived the sixties! |
|
|
|
