| Author |
Topic: Old Evans Hybrid amp/ need help! |
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 17 Oct 2020 4:33 am |
|
| I have an old Evans Hybrid amp that needs some work. Having hard time finding parts. I have checked with Scott at Evans and had no luck, since this is an older amp. Wondering if anyone has any idea who I could take it to? I am a couple of hours from OKC and Dallas...I would appreciate any suggestions, we just don't have anyone in this town that works on amps. |
|
|
 |
Michael Brebes
From:
Northridge CA
|
Posted 17 Oct 2020 12:09 pm
|
|
Do you have a schematic of the amp? With that info I might be able to help you with specifying parts.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso
Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100 |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 17 Oct 2020 1:55 pm
|
|
| No sir, I don't...think it just needs some resistors that we can't seem to find anywhere... |
|
|
|
Jeff Highland
From:
New South Wales, Australia
|
Posted 17 Oct 2020 2:38 pm
|
|
Can't find the right value of the resistor? you may need to use two or more in series or parallel
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone |
|
|
|
Darvin Willhoite
From:
Roxton, Tx. USA
|
Posted 17 Oct 2020 7:53 pm
|
|
Derrell Stephens is your guy, he probably built it. He lives near Texarkana, Tx.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro. |
|
|
|
Michael Brebes
From:
Northridge CA
|
Posted 18 Oct 2020 9:11 am
|
|
So what is the part(s) that you are trying to replace?
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso
Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100 |
|
|
|
Mike Schwartzman
From:
Maryland, USA
|
Posted 18 Oct 2020 6:57 pm
|
|
Hi Allan...I have an assortment of NOS resistors in various values. If you find out the values you need and let me know what they are, I'll see if there is anything there that you need.
_________________
Emmons Push Pull, BMI, Session 400, Home of the Slimcaster Tele. |
|
|
|
billy tam R.I.P.
From:
baton rouge, louisiana
|
Posted 19 Oct 2020 7:30 am Hybrid Evans
|
|
Derrell is your man. I have a 300 he put back like new a few years back.
PM me and I’ll send you contact #. Billy |
|
|
|
Graham Bland
From:
Tennessee, USA
|
Posted 25 Nov 2020 11:43 am Hybrid Evans
|
|
| They are right Alan....DERRELL is the man!!! |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 25 Nov 2020 12:26 pm Hybrid
|
|
The Showbud Compactra, 300 Hybrid and FET 500 HV were Jim Evans designs. Derrell designed the FET 500 LV
Jim sent me all the schematics he could find years ago as he wanted to repair his older amps.
We became great friends over the years. He was electronics go to guy for a lot things I would have need for help on. I miss him very much! One of the great ones!!!
 |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 25 Nov 2020 12:28 pm Hybrid
|
|
 |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 14 Dec 2020 1:07 pm
|
|
| Thanks, guys. Waiting for the contact info...thank you all! |
|
|
|
