| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Katana Breaking up
Reply to topic
Author Topic:  Katana Breaking up
Jeff Buesing


From:
Minnesota, USA
Post  Posted 11 Nov 2020 5:47 am    
Reply with quote

Hello. I normally play through a couple of NV 112's, but I have recently purchased a Katana 100. I use it (without messing with any of the fancy modeling, etc stuff) to practice. Just recently, it's started breaking up when I bear down on the volume pedal. It does this regardless of whether I have it on ,.5, 50, or 100 watts. I've bypassed my effects board, and switched cables and volume pedals. Additionally, I ran through a NV 112, and it doesn't do it. I'll add that it just started doing this. I'm uploading a pic of the controls to see if anybody can see a reason there why it might be doing this. Thanks in advance.


[/img]
View user's profile Send private message Send e-mail
Bruce Bjork


From:
Southern Coast of Maine
Post  Posted 11 Nov 2020 7:22 am    
Reply with quote

I’ve been playing through a 100 ever since they came out never had that problem and I play a lot, mystery. Have you tried backing off the Master?
_________________
Banjo, Dobro, Guild D-40, Telecaster, Justice Pro Lite 3x5, BOSS Katana 100, Peavey Nashville 112 in a Tommy Huff cabinet, Spark, FreeLoader, Baby Bloomer, Peterson StroboPlus HD, Stage One VP.
"Use the talents you possess; the woods would be very silent indeed if no birds sang but the best"
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 11 Nov 2020 8:19 am    
Reply with quote

A lot of your settings are fairly extreme. You can leave the Master up, but back off the Gain to about 9 or 10 o’clock. Try backing off the Presence a little, too.
View user's profile Send private message Send e-mail
Jeff Buesing


From:
Minnesota, USA
Post  Posted 11 Nov 2020 11:04 am    
Reply with quote

Thanks, I'll try that. I guess I'm confused by gain, volume, and master. It seems like three volume controls. I get it with two volume controls. Turn the gain up and the master down for crunch, and gain down and master up for clean. But the addition of a third volume is odd to me.
View user's profile Send private message Send e-mail
Henry Brooks

 

From:
Los Gatos, California, USA
Post  Posted 11 Nov 2020 11:44 am    
Reply with quote

The Nashville 112 has a compressor that prevents over driving the power amp. All of the Nashvilles models have this feature. Peavey calls it DDT compression.
Henry
P.S. I agree with Fred the volume controls setting seem high
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 11 Nov 2020 8:32 pm    
Reply with quote

Jeff Buesing wrote:
Thanks, I'll try that. I guess I'm confused by gain, volume, and master. It seems like three volume controls. I get it with two volume controls. Turn the gain up and the master down for crunch, and gain down and master up for clean. But the addition of a third volume is odd to me.


The Volume Control next to the Gain is for the volume level of the amp model you have selected, like a Master for that particular model. It should have very little if any effect on clarity. The Master Volume control on the far right is for the Katana overall. They might seem redundant if you are only using the amp in “Panel” mode, but the Gain/Volume controls are also for saving amp model settings as presets. The various amp models have various levels of gain and volume sensitivity.
View user's profile Send private message Send e-mail
Charlie Hansen


From:
Halifax, NS Canada and Various Southern Towns.
Post  Posted 12 Nov 2020 4:05 am    
Reply with quote

I had a similar problem with my 50 watt Katana but I discovered, as you say, the gain was set too high. In the end I ran mine about 9 o’clock and it worked fine.
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca.
View user's profile Send private message Send e-mail
Paul McEvoy

 

From:
Baltimore, USA
Post  Posted 12 Nov 2020 6:24 am    
Reply with quote

I could be wrong here but I think the volume and gain are like the knobs you'd have on a regular amp.

The master volume takes whatever sound you would coming out of that tube amp and makes it louder or softer (so you could have an overdriven tube sound but at a low volume).
View user's profile Send private message Send e-mail
Steven Black

 

From:
Gahanna, Ohio, USA
Post  Posted 13 Nov 2020 4:02 am     Amp breaking up
Reply with quote

you don't need that much Treble, back your bass back too.
View user's profile Send private message
Jeff Buesing


From:
Minnesota, USA
Post  Posted 13 Nov 2020 9:31 am     treble and bass
Reply with quote

Sorry, I disagree. Besides, that wouldn't account for the break up. Thanks everyone.
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 13 Nov 2020 4:58 pm    
Reply with quote

Have you had any luck solving the problem?
View user's profile Send private message Send e-mail
Jeff Buesing


From:
Minnesota, USA
Post  Posted 13 Nov 2020 6:39 pm     hello
Reply with quote

No, I tried turning all there obvious volumes down and it still does it. It's the amp.
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 13 Nov 2020 7:59 pm    
Reply with quote

As a last resort, try a factory reset. Sounds like you haven’t saved any settings, so you've got nothing to lose on that front. But maybe there is something in the global settings causing the glitch, and a reset should take care of that. Sometimes you just get a lemon. I’m pretty happy with my Katana, though it hasn’t been gig tested yet.
View user's profile Send private message Send e-mail
Jeff Buesing


From:
Minnesota, USA
Post  Posted 14 Nov 2020 5:49 am     Thanks
Reply with quote

That's a good thought.
View user's profile Send private message Send e-mail
Larry Dering


From:
Missouri, USA
Post  Posted 14 Nov 2020 7:33 am    
Reply with quote

Jeff, my Katana 100 is the previous model but I haven't experienced any poor sound with master volume maxed. I do however run my gain much lower than you. The normal volume hasn't been a problem at higher settings. I suggest you take the gain down and master volume full on and try using the volume for your loudness control. The gain seem to be the input sensitivity to me. You need gain but less than 12 o'clock. Maybe 9-10. Also make sure you haven't engaged any boost from your effects controls. I'm happy with mine overall.
View user's profile Send private message Send e-mail
Gene Tani


From:
Pac NW
Post  Posted 15 Nov 2020 8:31 am    
Reply with quote

you could *consider* 2 things but before you do either go on the forum/ research if people had any problems (and save patches)

- reset to default settings as they were shipped from the factory

https://www.boss.info/global/support/support_news/1703171456/

- check firmware release and upgrade (looks like you bought new, but check anyway)

https://www.vguitarforums.com/smf/index.php?board=231.0
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail
Philip Mitrakos


From:
The Beach South East Florida
Post  Posted 11 Dec 2020 11:19 pm    
Reply with quote

I have the MKII 100 KATANA (the new version) dont matter what you have the selector knob on wether it's clean or acoustic
Or turn the gain and volume knobs down as far as you can the amp does break up a little bit ,
View user's profile Send private message Send e-mail
Dustin Kleingartner


From:
Saint Paul MN, USA
Post  Posted 14 Dec 2020 6:45 am    
Reply with quote

Make sure your power control is set to 100w or 50w (far right knob/switch). Mine got bumped to 0.5w somehow and it took me awhile to figure out that was why it was sounding distorted.

Edit: nevermind, I re-read the original post
_________________
Proud parent of a good dog.
View user's profile Send private message Send e-mail Visit poster's website
Wesley Medlen

 

From:
LaCygne,Ks
Post  Posted 14 Dec 2020 12:56 pm    
Reply with quote

I've got mine set close to what red has I think it's doing fine' Wes
_________________
Justice S10 Jr, Gibson Electra 6string, Boss Katana 100, Steelers Choice ,Gretsch 6 string lap, Hilton VP
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron