| Author |
Topic: Emmons Left D-10 End Plate (SOLD) |
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 22 Aug 2020 10:20 am |
|
I have a used Emmons D-10 left end plate. I don't foresee having a use for it, so hopefully someone out there can use it for a project. it is sized to fit a cabinet width of 10 7/16" (see photo with ruler). I believe it would work equally well for a LeGrande or push-pull cabinet (as long as they will fit the cabinet width). Please verify this prior to purchasing, I don't want anyone to be disappointed.
The Emmons catalog lists these for $416.00 each, new.
It looks very good and could be used as is but you might decide to have it repolished, depending on your situation. I'll sell it for $180.00 shipped to the lower 48 states.
I can accept PayPal, USPS money order or your personal check (if you're not in a hurry).
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
----------------------------------
Last edited by Lynn Stafford on 18 Sep 2020 9:22 am; edited 2 times in total |
|
|
 |
Daryll LeCroy
From:
Georgia, USA
|
Posted 22 Aug 2020 10:26 pm
|
|
| I need an end plate like this for a LeGrande II. But my cabinet measures a hair's width shy of 10 1/2". Definitely not 10 7/16". Am I measuring wrong? Can anyone verify for a LeGrande II? Thanks. |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 17 Sep 2020 7:55 am Bump
|
|
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 18 Sep 2020 9:21 am Endplate Is Sold
|
|
b0b, please close.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
