| Author |
Topic: rule of thumb for knee lever mounting? |
Matt Sutton
From:
New York, USA
|
Posted 16 Aug 2020 1:17 pm |
|
I'm adding a RKL to my ZB D10, and while I've got a pretty good idea about where to place it, I wanted to check if there was any common wisdom out there to consider- I'd love to not screw it up and have to re-drill.
It'll probably play on both necks. Right now, my LKL lowers E's, and the RKR lowers D# to D. The new one will probably lower the B's, though I'm still considering that.
thanks,
Matt |
|
|
 |
Eric Dahlhoff
From:
Point Arena, California
|
Posted 16 Aug 2020 1:27 pm
|
|
Since you already have a RKR, I would put the RKL at a comfortable location on the other side of your knee. I have found that having the shafts 5-1/2" to 6" apart works good for me and my knee and how I sit.
_________________
"To live outside the law you must be honest." (Bob Dylan) |
|
|
|
Matt Sutton
From:
New York, USA
|
Posted 17 Aug 2020 7:25 am
|
|
| Thanks Eric- yeah that's pretty much what I ended up with too. |
|
|
|
