| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic string-no, not that kind!
Reply to topic
Author Topic:  string-no, not that kind!
Doug Hall

 

From:
Alabama, USA
Post  Posted 2 Jul 2020 1:09 pm    
Reply with quote

What kind of string should I use to restring my volume pedal, and where can I get it? (This post follows 30 minutes of unsuccessful internet search.)
_________________
Mullen G2 SD10, Excel S10; Peavey 400s (LTD, Vegas, Session, and Renown); Nashville 112; etc...
View user's profile Send private message Send e-mail
Larry Dering


From:
Missouri, USA
Post  Posted 2 Jul 2020 2:36 pm    
Reply with quote

If it's a Goodrich I use mason line as used by the brick layers. Ernie Ball has their own line. Bill Ferguson and Jerry Roller are Goodrich dealers and could help you. They are forum members. A search on the forum will yield tons of previous posts on this.
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 2 Jul 2020 3:28 pm    
Reply with quote

I don't use a pot pedal, but I wonder if the stuff that French horn players use would work well. It's ultra flexible and designed to flick back and forth all night.
I supposed it's called rotary valve cord.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Mike Schwartzman

 

From:
Maryland, USA
Post  Posted 2 Jul 2020 6:08 pm    
Reply with quote

I have had good results with a length of braided string from a window blind. It's been on my Emmons pot pedal for a couple of years with no problems.
_________________
Emmons Push Pull, BMI, Session 400, Home of the Slimcaster Tele.
View user's profile Send private message Send e-mail
Doug Hall

 

From:
Alabama, USA
Post  Posted 2 Jul 2020 6:53 pm    
Reply with quote

Thanks for all the suggestions. Earlier in my search, I saw kevlar cord, and thought about trying that out. But our good buddy Tom Bradshaw is already arranging to send me some good stuff. (Thanks, Tom!)
_________________
Mullen G2 SD10, Excel S10; Peavey 400s (LTD, Vegas, Session, and Renown); Nashville 112; etc...
View user's profile Send private message Send e-mail
Ken Pippus


From:
Langford, BC, Canada
Post  Posted 2 Jul 2020 8:57 pm    
Reply with quote

Standard fly fishing line works well.
View user's profile Send private message Send e-mail
Gene Tani


From:
Pac NW
Post  Posted 3 Jul 2020 6:14 am     string
Reply with quote

The stuff sold by shops for climbing/rigging as accessory/utility cord or perlon line looks very similar to what's in my Goodrich, I'm guess the 2mm stuff. They also have kevlar/dyneema cord in thin diameters:

https://www.rei.com/product/716685/pmi-utility-cord-2mm
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail
George Kimery

 

From:
Limestone, TN, USA
Post  Posted 3 Jul 2020 6:34 am     String..no not that kind
Reply with quote

I went through this last week. I bought mason's string at Lowe's. (located with the rope) The smallest spool they had was 250 ft. and I had a choice of several different colors. It is a smaller diameter than the old string, but it's 1000 times stronger than you need to turn a pot shaft. The smaller diameter does seat better underneath the attaching screws. Only time will tell if it works out.

I really like the idea on the venetian blind strings. I just took a look at mine and they are larger diameter than the mason string. They are extra long, so I could have gotten what I needed off of them.

In over 50 years of playing pot pedals, I have never broken a string. The hype about using an active pedal because you dont have to worry about breaking a string is sales hype. The slight pull on the string to turn the pot shaft is never going to cause the string to break. The string is easy to replace, so I have never considered it an issue. Replacing a pot is also an easy job and they last for several years before needing replacement. I always have a backup pedal with me just in case.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 3 Jul 2020 6:44 am    
Reply with quote

I agree with Ken.
I've used fishing line. Very Happy
Erv
View user's profile Send private message Send e-mail
Brooks Montgomery


From:
Idaho, USA
Post  Posted 3 Jul 2020 10:16 am    
Reply with quote

Erv Niehaus wrote:
I agree with Ken.
I've used fishing line. Very Happy
Erv

What kind of fishing line, braided Dacron? Certainly not mono?
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Ken Pippus


From:
Langford, BC, Canada
Post  Posted 3 Jul 2020 10:18 am    
Reply with quote

Fly line.
View user's profile Send private message Send e-mail
Brooks Montgomery


From:
Idaho, USA
Post  Posted 3 Jul 2020 10:38 am    
Reply with quote

Ken Pippus wrote:
Fly line.


Interesting! I’ve got literally thousands of yards of flyline.
If any of you can’t track it down, drop me a PM.
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Charlie Hansen


From:
Halifax, NS Canada and Various Southern Towns.
Post  Posted 3 Jul 2020 2:05 pm    
Reply with quote

Someone sent me some waxed string a couple of years ago. Sorry I can’t remember who but it works great and has for a couple of years.
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca.
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 3 Jul 2020 2:10 pm    
Reply with quote

Years ago Bobbe Seymour recommended using waxed shoe strings designed for men's dress shoes.
View user's profile Send private message Send e-mail
George Kimery

 

From:
Limestone, TN, USA
Post  Posted 7 Jul 2020 8:12 pm     String..no not that kind
Reply with quote

Mike, I used the venetian blind cord, per your suggestion. Looks fabulous. Thanks for the tip.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron