| Author |
Topic: WTB changer |
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 10 Jun 2020 7:59 pm |
|
| wtb an old pedal steel changer. an MSA would be fine. double or triple raise/lower. springs and stop plate would be fine. i would buy an 8 or 6 or 10 or 12 strings. just working on a project console guitar. like to add some knees to one neck on it. send an email as to what you have and what you want for it. |
|
|
 |
Barry Coker
From:
Bagley Alabama, USA
|
Posted 11 Jun 2020 4:40 am Changer
|
|
You can check ebay under Sho Bud there are a couple there.
Good luck
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 11 Jun 2020 8:33 am msa changer?
|
|
| bill, i think i have a 10 string msa double/double, i would trade them for a emmons c/6th changer. or sell for enough to buy a pp changer....thanks jack |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 11 Jun 2020 8:37 am
|
|
| thanks for the offer. still looking. not looking for anything expensive. |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 19 Jun 2020 9:23 am
|
|
| will take an incomplete MSA parts project changer...only need 6 or 8 strings. if you have a 10 or 12 string MSA changer that is missing a couple of string parts, i can still use that. thx! |
|
|
|
Dennis Brown
From:
Gowen, Mi. USA
|
Posted 20 Jun 2020 4:12 am changer
|
|
| I sent you pictures Bill. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 20 Jun 2020 7:28 am
|
|
| I've got a number of changers at the shop- Carter, Emmons C6, older MSA |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 20 Jun 2020 11:23 am Re: changer
|
|
| Dennis Brown wrote: |
| I sent you pictures Bill. |
got em. thanks dennis. |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 20 Jun 2020 5:59 pm
|
|
| close it up. |
|
|
|
